Best Universities for Masters certificate program in Mechanical Engineering

My experience with CVN has been very good. They offer a wide variety of classes to choose from. They keep me up-to-date with all the happenings at Columbia University. My correspondence with them has always resulted in positive solutions and they accept Tuition Vouchers from Companies, unlike many other programs.

Applicants to the Certification of Professional Achievement Program must submit official transcripts, 3 letters of recommendation, personal-professional statement, resume, and the $150 application fee.

Degree required for admission: Students admitted to the program must possess a Bachelor degree in Mechanical Engineering or other related field (subject to the approval of the Mechanical Engineering Program) from an accredited academic institution.

4 Graduate-level classes all earned through CVN, as a non-degree student.

Completion of program within two (2) calendar years.

The curriculum of this program was designed to provide engineers with knowledge and expertise in (1) ensuring universal access to modern energy services, (2) increasing the share of renewable energy in the global energy mix, and (3) increasing the rate of improvement in energy efficiency.

The Certification of Professional Achievement in Sustainable Energy consists of four 3-credit courses. The specific topics that will be covered range from energy sources, energy conversion technologies, and energy infrastructure planning to applications and implementation as they pertain to different energy services. System level issues integration of renewable energy and incorporating energy efficiency will be addressed.

MECE E4304 Turbomachinery: This course introduces students to the basics of theory, design, selection and applications of turbomachinery. Turbomachines are widely used in many engineering applications such as energy conversion, power plants, air-conditioning, pumping, refrigeration and vehicle engines, as there are pumps, blowers, compressors, gas turbines, jet engines, wind turbines etc. Applications are drawn from energy conversion technologies, HVAC and propulsion. The course provides students with a basic understanding of the different kinds of turbomachines.

MECE E4312 Solar Thermal Engineering: Prerequisite: MECE E 11 Heat Transfer. Fundamentals of solar energy transport: radiation heat transfer, convention, conduction and phase change processes. Heat exchangers and solar collectors: basic methods of thermal design, flow arrangements, effects of variable conditions, rating procedures. Solar energy concentration. Piping Systems: series and parallel arrangements, fluid movers. Thermal response and management of photovoltaic energy conversion. Solar energy storage. Solar cooling, solar thermal power and cogeneration. Applications to the design of solar thermal engineering systems.

MECE E4211 Energy: Sources and Conversion: Prerequisites: MECE E 01. Energy sources such as oil, gas, coal, gas hydrates, hydrogen, solar, and wind. Energy conversion systems for electrical power generation, automobiles, propulsion and refrigeration. Engines, steam and gas turbines, wind turbines devices such as fuel cells, thermoelectric converters, and photovoltaic cells. Specialized topics may include carbon-dioxide sequestration, cogeneration, hybrid vehicles and energy storage devices.

Estimated cost of one nondegree course: $7,586Estimated total cost of certification (four courses): $30,029.00.

Estimated total cost of MS (ten courses): $74,915.00Estimated total cost of DES (ten courses plus a minimum of 12 research credits): $104,049.00.

Graduate Admission Application Fee: $150 non-refundable one-time feeCertification Program Application Fee: $150 non-refundable one-time fee.

Assumes DES student enrolls in two six-credit research courses.

For Drop Withdrawal fees and dates, refer to the Academic Calendar for the current term.

Please note: CVN no longer offers courses for audit.

These courses are concentrated in five emphasis areas: (1) dynamics and controls (2) design and manufacturing (3) mechanics and materials (4) mechatronic systems engineering and (5) thermofluids and energy. Educational efforts are channeled to expand the skills of prospective and practicing engineers not only in understanding fundamentals but also in developing competence in analyzing engineering systems. The department offers graduate degrees at the master engineer and doctorate levels, as well as certificates.

The Mechanical and Aerospace graduate programs are designed to educate students with the following Graduate Core Competencies.

CC 1: Apply advanced concepts of mechanical engineering, mathematics, and science. CC 2: Solve complex mechanical engineering problems. CC 3: Adapt to changing technology and new advances in the field of Mechanical Engineering. CC 4: Understand the impact of engineering solutions in a global and societal context.

RC 1: Conduct independent research with modern tools and contemporary knowledge. RC 2: Communicate and generate technical written reports of original content and of the highest quality.

These courses are concentrated in five emphasis areas:.

The Master program in Aerospace Engineering (MSAE) is a two-year program targeted at students with an engineering or science background who want to pursue a career in the aerospace industry, government, or academia. Students will learn to synthesize and design aerospace systems through coursework and research activities.

The Doctor of Philosophy degree is conferred by the School of Engineering primarily in recognition of competence in the subject field and the ability to investigate engineering problems independently, resulting in a new contribution to knowledge in the field.

Certificate programs are designed to provide an intensive background in a focused area at the graduate level. With 16-20 required units for completion, each certificate is designed to be completed in a much shorter period of time.

Mechanical Engineering Sections Mechanical Engineering.

Mechanical EngineeringSanta Clara University500 El Camino RealSanta Clara, CA 95053.

The academic degrees offered in the Mechanical Materials Engineering department are:.

Mechanical Engineering for Technical Leaders (METL) Graduate Certificate Program.

The Mechanical Engineering Department has various resources to help students:.

Systems engineering is an interdisciplinary field of engineering and engineering management that focuses on design, integrate, and manage complex systems over their life cycles. The program is evolving so check back again soon for updates!

Working professionals may be able to take most classes online without applying to the University.

To obtain the certificate, students must complete 15 credit hours of approved course work with a 3.0 GPA or higher and minimum B grade in the certificate courses. The course work is made up of 9 hours of core courses, and 6 hours of electives. The 3 core courses provide engineers with a basic understanding of systems engineering and the ability to develop, analyze, and model systems of all kinds. The electives allow students to choose related courses of interest from a variety of departments from across the University.

Pass the following 2 courses with a grade of B or better (currently special topics courses).

(3) Fundamentals of Systems Engineering (Spring and Fall).

This course provides an of the science of systems engineering, and an introduction to the systems approach and methodological framework for creation and re-engineering of large-scale systems and processes. The student will develop an understanding of the larger context in which requirements for a system are developed, and learn trade-offs between developing mission needs or market opportunities first (versus accessing available technology first).Techniques for translating needs and priorities into an operational concept and then into specific functional and performance requirements will be presented. The student will develop an understanding of risk management techniques and the circumstances where they are appropriately employed. Fall 2021 Fundamentals Syllabus.

(3) Systems Engineering and Integration (Fall 2021 Spring 22).

This course provides the student with an understanding of the context and framework for carrying out a systems engineering project and the system-level responsibilities of a systems engineer, through hands-on activity. Topics covered include systems design and development, system test and evaluation, system reliability, system maintainability, human factors and system design, system producibility and supportability, balancing life-cycle cost, schedule, suitability and performance, risk management, and systems engineering project management and control. Types of systems considered will range from small-scale to large-scale and from primarily technical to primarily social-political. Fall 2021 Systems Integration Syllabus.

Three hours in selected Planning or Production of Systems course (3 hours).

Note: Cross listed courses only count toward fulfilling one requirement.

Data Science in Civil Engineering.

Emerging Technologies and Engineering Entrepreneurship.

Electrical Forensic Engineering and Failure Analysis.

Product-Safety Engineering and Engineering Ethics.

Process Engineering Statistics (2).

Data Management in Engineering and Heavy Industry.

Special Topics Summer 2022 (subject to change): ME EN 6960 Project Management ME EN 6960 Advanced Engineering Economy.

This entire certificate can be completed as a non-degree seeking non-matriculated student, however if students decide they want to apply the courses towards a M.S. or Ph.D. graduate program, only 9 credits of non-matriculated courses are allowed to count towards the degree so students should Graduate School prior to completing their 9th non-matriculated credit.

Fundamentals of Systems EngineeringSystems Engineering and IntegrationSystems SimulationProduction Systems and Operations (canceled).

Aeronautical engineering is one of the fastest-growing engineering fields in the United States today and demands engineers with specialized skills. beyond what is covered in the Mechanical Engineering program. The minor is geared toward students pursuing a Bachelor of Science in Mechanical Engineering, and the certificate is geared toward graduates of a Mechanical Engineering (or comparable) program. all built around theory and practice. Throughout your studies, you will explore fluid dynamics, propulsion sources, aerodynamics, structural mechanics, control systems, noise and vibration, and engineering materials.

Today, aeronautical engineering at Lawrence Tech continues to thrive. Each year, students successfully compete in SAE Aero Design® competitions and are active on campus in the student branch of the American Institute of Aeronautics and Astronautics. In recent years, graduates have been hired by major aeronautical and aerospace companies including NASA, Cessna, Boeing, and Goodrich Aerostructures.

If you are earning a Bachelor of Science in Mechanical Engineering, you are eligible to declare a minor in aeronautical engineering. If you have already completed a Bachelor of Science in Mechanical Engineering, or a comparable degree, you may pursue a certificate in aeronautical engineering.

Dr. Gerhardt teaches courses in aerodynamics, thermal dynamics, integrated mechanical design, and many others.

Advance your career, gain new skills and expand your network with a graduate certificate.

These courses are geared towards either recent bachelor degree graduates or professionals who want to explore an engineering specialty without making the commitment of a full-fledged graduate program. Graduate certificates can be earned in:.