Best Accredited Universities for Doctoral Phd program in Mechanical Engineering

84 universities offer graduate PHD program in Mechanical Engineering

Harvard University logo
Ranked as:  #3 in Best National University
Tuition:  $50,654 per year
Total Cost:  $101,308 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  Massachusetts
Acceptance:  5.01%

For specific information on the Materials Science Mechanical Engineering PhD program, see the navigation links to the right.

What follows on this page is an of all Ph.D. programs at the School additional information and guidance can be found on the Graduate Policies pages.

10 semester-long graduate courses, including at least 8 disciplinary. For details on course requirements, see the school overall PhD course requirements and the individual program pages linked therein.

Program Plan (i.e., the set of courses to be used towards the degree) approval by the Committee on Higher Degrees (CHD).

Oral Qualifying Examination Preparation in the major field is evaluated in an oral examination by a qualifying committee. The examination has the dual purpose of verifying the adequacy of the student preparation for undertaking research in a chosen field and of assessing the student ability to synthesize knowledge already acquired. For details on arranging your Qualifying Exam, see the exam policies and the individual program pages linked therein.

Harvard PhD students may choose to pursue these additional aspects:.

A Secondary Field (which is similar to a minor subject area). SEAS offers PhD Secondary Field programs in Data Science and in Computational Science and Engineering. GSAS lists secondary fields offered by other programs.

A Master of Science (S.M.) degree conferred en route to the Ph.D in one of several of SEAS subject areas. For details see here.

A Teaching Certificate awarded by the Derek Bok Center for Teaching and Learning.

SEAS PhD students may apply to participate in the Health Sciences and Technology graduate program with Harvard Medical School and MIT.

˅ More Details

Harvard John A. Paulson School of Engineering and Applied Sciences - of the PhD

  • GRE Required:  Yes
  • Research assistantships:  864
  • Teaching assistantships:  1388
  • Financial Aid: Register to view the details
Stanford University logo
Ranked as:  #3 in Best National University
Tuition:  $55,011 per year
Total Cost:  $110,022 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  California
Acceptance:  5.19%

At the graduate level, the Mechanical Engineering program aligns academic course work with research to prepare scholars in specialized areas within the field.

Areas of specialization range from automatic controls, energy systems, fluid mechanics, heat transfer and solid mechanics to biomechanical engineering, MEMS and design. Through course work and guided research, the program prepares students to make original contributions in Mechanical Engineering and related fields.

The department also offers two post-master degrees: Engineer and Doctor of Philosophy.

˅ More Details

Mechanical Engineering

  • GRE Required:  Yes
  • Research assistantships:  2280
  • Teaching assistantships:  1007
  • Financial Aid: Register to view the details
Johns Hopkins University logo
Ranked as:  #7 in Best National University
Tuition:  $59,425 per year
Total Cost:  $118,850 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  Maryland
Acceptance:  11.06%

The Doctor of Philosophy in Mechanical Engineering prepares students for careers in research and academia. You will also acquire strong, independent research skills and begin to develop your own skills and reputation as a member of the research community.

The Doctor of Philosophy (PhD) normally requires four to five years of full-time study beyond the baccalaureate degree. There is no formal course requirement for a doctoral degree.

PhD candidates must pass the departmental exam, the Graduate Board Oral exam, submit a doctoral dissertation, and pass a final dissertation defense.

You, too, can join this elite group with an admission to our highly-ranked PhD program.

EN.500.602 Environmental and Applied Fluid Mechanics Seminar Series.

˅ More Details

Mechanical Engineering

  • GRE Required:  Yes
  • Research assistantships:  2378
  • Teaching assistantships:  304
  • Financial Aid: Register to view the details
we can find best-fit college

374 universities offer the Master's program in Mechanical Engineering.

Which one best suits your need?

Please select a program.
Select a program:
Please choose a course.
Please choose a specialization.
Please choose an option.
Have you taken the GRE?
GRE quantitative field is required. (Minimum: 80 | Maximum: 170)
GRE Verbal field is required. (Minimum: 80 | Maximum: 170)
GRE AWA field is required. (Minimum: 0 | Maximum: 6)
Please choose a type of university.
Type of University:
Education level completed:
Please choose a price interval.
$5000 $80000
Tuition sorting:
Please provide a First Name.
Please provide a Last Name.
Please provide a name.
Please provide your address.
Please, enter valid email address.
Please, enter valid phone.
Please, enter valid phone.
Duke University logo
Ranked as:  #10 in Best National University
Tuition:  $59,140 per year
Total Cost:  $118,280 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  North Carolina
Acceptance:  7.74%

The graduate curricula are uncommonly flexible whereby the students can define the academic path that best suits their professional goals.

Mechanical Engineering and Materials Science: PhD Admissions and Enrollment Statistics.

Mechanical Engineering and Materials Science: PhD Completion Rate Statistics.

Mechanical Engineering and Materials Science: PhD Time to Degree Statistics.

Mechanical Engineering and Materials Science: PhD Career Outcomes Statistics.

Graduate School Application Requirements See the Application Instructions page for important details each Graduate School requirement.

English Language Exam: TOEFL, IELTS, or Duolingo English Test required for applicants whose first language is not Englishtest waiver may apply for some applicants.

Additional Components Masters: Providing a recorded video response is required. The video recording platform is available within the online application.

PhD: Providing a recorded video response is optional. For international students, completion of a video can potentially negate the need for a live language interview later on in the application process. If you choose to include a video, the video recording platform is available within the online application.

We strongly encourage you to review additional department-specific application guidance from the program to which you are applying: Departmental Application Guidance (PhD).

˅ More Details

Ph.D. in Mechanical Engineering and Materials Science - The Graduate School

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
Northwestern University logo
Ranked as:  #10 in Best National University
Tuition:  $56,567 per year
Total Cost:  $113,134 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  Illinois
Acceptance:  9.31%

PhD students are not required to follow a rigid curriculum each student may arrange a curriculum that accommodates individual needs, talents, and interests while satisfying the basic degree requirements. The basic degree requirements are designed to ensure that the students develop a rigorous appreciation of mathematics, and have a broad exposure to fields of engineering and science outside of their immediate area of interest.

The PhD program requires six quarters of course work beyond the bachelor degree and the successful completion of a dissertation after at least six quarters devoted to research. Students entering the PhD program directly after completion of a bachelor degree are not required to obtain an MS but may choose to do so.

The PhD program typically takes four to five years to complete.

Kellogg Summer Program: Management for Scientists and Engineers.

Number of post-BS courses: A total of 15 course units (excluding project research units) are required toward PhD. Nine course units within this 15 units must satisfy the MS course requirements.

Breadth: General program students must take at least one course each from four of seven sub-areas:.

MS from another school: Students admitted with an MS degree from elsewhere may petition for a waiver of a maximum of six course units of the PhD requirement of 15 courses. No residency credit will be awarded by The Graduate School (TGS) for work completed in a graduate program outside of TGS. All students pursuing a PhD, regardless of previous degrees, must complete eight quarters of residency at Northwestern consecutively over two years, including summers.

Level: At least one-half of the course units satisfying the post-MS requirement must be 400-level courses.

Professional essentials: Registration for the non-credit ME 513 seminar is required for one quarter within the first two years. It is strongly recommended that this seminar course be taken before PhD candidacy.

Approval: Students must obtain approval from their adviser for all courses in advance and submit a signed course form each quarter to the ME graduate program assistant before registration.

Timeline: The course requirement for the PhD program shall be fulfilled within the first 12 and 8 quarters of full-time registration for students matriculating with BS and MS, respectively.

All international PhD students whose primary language is not English are required to take the Versant English Test after arriving at Northwestern. Students whose countries of origin are Australia, Canada, New Zealand, or the United Kingdom are exempt. Versant test results will be released to students, their departments, and The Graduate School.

Eight quarters of full-time registration consecutively over two years, including summers, are required. Full-time registration requires enrollment in a combination of course units and ME 590 (research) units for a total of three to four units each quarter.

After residency has been obtained, full-time registration is maintained at a reduced tuition by registering for TGS 500 (Advanced Doctoral Study).

Students are admitted to candidacy for the PhD degree by passing:.

A research qualification exam before the end of the fifth quarter (entering with MS degree) or the seventh quarter (entering with BS degree) of full-time graduate study.

A dissertation proposal exam by the end of the second year of full-time study beyond the MS degree or the end of the third year of full-time study beyond the BS degree.

All PhD students shall pass an oral research qualification exam that tests their research ability. Students who enter with MS degree or BS degree shall take the exam before the end of the fifth or seventh quarter of full-time graduate study, respectively. Taking the exam sooner is encouraged.

With the consensus of adviser, PhD students who enter with BS degree may consider to first obtain an MS degree and use the MS thesis exam as a substitute for the PhD research qualification exam. Any requests for changes to the regular deadline require prior approval of the Committee of Graduate Studies.

Students should register for at least two units of ME 590 before the exam. A student who does not pass the exam on the first attempt may:.

Leave the program, no than two attempts of taking the exam may be made.

The composition of the examination committee is subject to the final approval by Graduate Studies Committee.

Students are admitted to candidacy for the PhD degree by passing an oral qualifying exam. The oral qualifying examination will be based on (but not restricted to) a written research proposal (no than 30 pages in total length, double spaced) prepared by the student, a proposal presentation made by student, and an oral examination administered by the examination committee.

Students must take the dissertation proposal examination no later than the end of the second year of full-time study beyond the MS degree or the end of the third year of full-time study beyond the BS degree. Students who fail the examination may, upon the recommendation of their committee, retake it within one quarter. Students who do not pass the re-examination shall not continue in the PhD program.

At least one of the members must be from outside of the ME department. The committee normally conducts the final examination for the PhD at a later date.

Formation of an examination committee is subject to the approval of both the ME department and The Graduate School.

All but one ME 499 may be used toward the overall GPA. Students whose GPA falls short of a 3.5 average shall be required to take an oral and or written preparatory examination prior to the oral qualifying examination.

The student adviser shall not serve on the preparatory examination committee. The committee will inform the students involved as to the form and content of the examination beforehand. Students who fail the preparatory examination shall not continue in the PhD program.

A full schedule of classes are held on Wednesdays during eight weeks of the summer quarter. Students must have completed all coursework and qualifying exams to be eligible for the program.

Request a customized program guide the PhD program in mechanical engineering.

˅ More Details

Northwestern Engineering

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
logo
Ranked as:  #15 in Best National University
Tuition:  $56,562 per year
Total Cost:  $113,124 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  Missouri
Acceptance:  16.02%

The quantitative requirement for the PhD degree in Mechanical Engineering is 72 credit hours. Of these, 36 to 48 units must be course credit, and 24 to 36 units must be research credit, MEMS 600. Units earned toward a previous MS in Engineering may be counted toward these totals.

Our PhD students are fully funded, including full tuition support and health insurance. As a doctoral candidate, you will also receive a generous stipend to cover living expenses. This support is guaranteed as you continue to make satisfactory progress towards your degree.

Full-time doctoral students in any area are required to take MEMS 501 Seminar every semester. This is a zero-unit, pass-fail course.

Courses may be chosen from 400 and graduate-level engineering courses with the following restrictions:.

A maximum of 6 units of 400-level courses are allowed, and these must be from courses not required for the BSME degree (if counted for the MSME degree).

The committee should consist of at least five members, at least three of which are from the Mechanical Engineering and Materials Science. At least one member must be from outside of the department.

A residency requirement of two consecutive semesters of full-time enrollment in doctoral studies is also required. To receive a PhD, the candidate must satisfy the applicable teaching requirements.

Most students typically have a S or an MS in either Mechanical or Aerospace Engineering.

Every company in the world hires those with an ME degree, but those with a Ph.D. specialize in the latest products that involve new technology. A Ph.D. also will provide you the opportunity to teach in a University.

While there is no fixed time to complete a PhD, most students finish in approximately five years.

There are a number of resources offered by the Graduate School in regard to housing, transportation and support for both domestic and international students. The University assists graduate students with finding suitable off-campus housing through quadrangle.wustl.edu.

Students are expected to commit 40 hours week towards the program. This includes time for both academic coursework as well as research.

Yes, Habif Health and Wellness offers medical and mental health services for graduate students. The Liberman center offers a variety of clubs, seminars and workshops specifically geared toward graduate students. AGES is the Association of Graduate Engineering students and all PhD students are members. The Association offers networking events and social events.

All full-time graduate students are required to register and pass MEMS 501 Graduate Seminar.

PhD students in the McKelvey School of Engineering are fully-funded, with a competitive stipend and full tuition remission.

˅ More Details

Mechanical Engineering Materials Science at WashU

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
Columbia University in the City of New York logo
Ranked as:  #18 in Best National University
Tuition:  $51,194 per year
Total Cost:  $102,388 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  New York
Acceptance:  6.66%

Every doctoral candidate in the Mechanical Engineering is expected to attain a level of mastery in an area of mechanical engineering, and must therefore choose a field and take the most advanced courses offered in that field. This adviser helps select a research problem and supervises the research, writing, and defense of the dissertation.

Qualifying Exam: The exam consists of a written exam covering a number of areas of Mechanical Engineering. A candidate who fails the examination may be permitted to repeat it once in the following year. Typical Time of Completion: Two semesters after matriculation. Exam given in May.

Master of Philosophy (MPhil): Doctoral students should apply for the M.Phil. after completing the following requirements: passing the doctoral qualifying exam, accumulating six residence units, and earning 30 credits beyond the M.S. degree. Students must submit an M.Phil. application by email to Mel Francis.

The committee considers whether the proposed problem is suitable for doctoral research, whether the plan of attack is well formulated and appropriate to the problem, and whether the student is adequately prepared. Typical Time of Completion: No later than six semesters after passing the Qualifying Exam.

The exam consists of a written exam covering a number of areas of Mechanical Engineering.

Every semester, the Graduate Committee reviews the standing of every doctoral student enrolled in the program. In each case, the committee goal is to ensure that the student is making progress towards graduation and achieving every milestone along the way (such as the qualifying exam or the thesis proposal) on schedule.

If followed, you can ensure a very timely and smooth process. All of the steps can take place at any time during the year. However, if you are aiming to receive your degree at a specific degree conferral (October, February or May), you must follow a set of deadlines for that conferral. These deadlines are available online here.

Registration Information for PhD Students with Advanced Standing.

At the time of admission to a terminal doctoral program, the Mechanical Engineering guarantees a minimum of five years of contingent on maintaining Good Academic Standing within both the Mechanical Engineering and the Graduate School of Arts and Sciences.

The Mechanical Engineering offers two doctoral degrees: Doctor of Philosophy (Ph.D.) and Doctor of Engineering Science (Eng.Sc.D.). Ph.D. degrees are conferred by the Graduate School of Arts and Sciences (GSAS) and Eng.Sc.D. degrees are conferred by Fu Foundation School of Engineering and Applied Science.

GPA of 3.2 or better in graduate courses.

4 semesters of graduate seminar MECE E9500 (must attend a minimum of 4 seminars in each semester of seminar registration).

Read application requirements and apply online on the Graduate Student Affairs site.

˅ More Details

Mechanical Engineering

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
University of California-Berkeley logo
Ranked as:  #20 in Best National University
Tuition:  $29,347 per year
Total Cost:  $58,694 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  California
Acceptance:  17.48%

Graduate Admissions M.S., Ph.D., D.Eng.

News Alumni Newsletter Mechanical Engineering Seminars Events Videos.

Admissions M.S., Ph.D., D.Eng. CWO Application MEng Application 5th Year Masters Admissions Application Tips Fees and Readmission Change of Major.

Graduate Programs Ph.D. D.Eng. Master of Science Master of Engineering Fifth Year B.S. M.S. Program Degree Requirements 5th Year Masters Program Handbook Special Programs DEEST.

Graduate Programs Ph.D. D.Eng. Master of Science Master of Engineering Fifth Year B.S. M.S. Program Degree Requirements 5th Year Masters Program Handbook Special Programs Admissions M.S., Ph.D., D.Eng.

Course Information Tentative ME course schedule Graduate Course Syllabi.

Fifth Year B.S. M.S. Program Degree Requirements 5th Year Masters Program Handbook.

˅ More Details

UC Berkeley Mechanical Engineering

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
logo
Ranked as:  #25 in Best National University
Tuition:  $48,715 per year
Total Cost:  $97,430 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  California
Acceptance:  16.11%

Aerospace mechanical technologies for improving urban life quality.

But for the long term such things do not matter much. Hence, it is necessary to not take any such defeat too seriously. Ofcourse, you should feel sad and strive to achieve better but it is very important to not let it affect your mental health. Things have a way of falling in place. For example, even if you do not get your dream university, you may end up getting a job better than most people at that university.

Whenever I face a challenge in my graduate studies, I try to have a positive and fresh mindset. Positive thoughts help me a lot to overcome various hardships. I believe the way I think really affects the way I react.

In my first year of my PhD, My colleagues and I won the best paper award for robotic 3D printing research at ASME IDETC-CIE conference. We worked hard for the project and it felt really great to see our hard work finally pay off.

Great resources for research, well-organized graduate program, and the location.

We studied and hung out together, discussed various topics, and helped each other. My graduate life is wonderful because of them!

Satyandra K. Gupta (Aerospace and Mechanical Engineering Department).

Fail often but safely. Often the fastest way to learn and master something is to learn every way of not doing it, either by trying it yourself or watching others attempt it. That being said, you need to make sure each failure does not result in harm to yourself or others. So long as that is possible, the fastest path to success is to fail constantly and creatively.

˅ More Details

Ph.D. in Mechanical Engineering at the USC Viterbi School of Engineering - Doctoral Program

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details
New York University logo
Ranked as:  #25 in Best National University
Tuition:  $36,892 per year
Total Cost:  $73,784 * This tuition data is based on IPEDS. For the latest tuition amount, refer to the respective college websites.
State:  New York
Acceptance:  21.09%

Everything from automobiles to air conditioning, robotic parts to power plants, people movers to artificial limbs, and rocket engines to satellites. At the School of Engineering, we groom our students to become the inventors and innovators of tomorrow. Our PhD in Mechanical Engineering program offers a balanced curriculum that emphasizes the principles behind these designs and approaches. To apply these principles in the field, we make computational and research experience an integral component of your studies.

Many of our graduates enter such fields as computer engineering, nanotechnology, software development, and financial engineering. They also occupy positions in bioengineering, manufacturing, astronautics, systems engineering, and corporate management and law.

Admission to this program requires an MS in Mechanical or Aerospace Engineering or other closely related engineering field or applied sciences. Generally, you must also be able to present a GPA of 3.5 or better in your MS work. In cases where it is unclear that the required MS specialization has been satisfied, the degree requirements for the Mechanical Engineering, MS at the School of Engineering will define the necessary reparation. This same criterion applies for degrees received in other engineering disciplines.

Those with a BS in Mechanical or Aerospace Engineering and a GPA of 3.5 or better may apply directly to the program.

Applicants to this degree program may be eligible to participate in the Abu Dhabi Global Fellow Program.

Tandon Ph.D. students can specialize their studies in mechanical engineering with a focus on urban science through the new doctoral track offered by the Center for Urban Science + Progress.

The general credit requirements for the Doctor of Philosophy in Mechanical Engineering degree at the School of Engineering are:.

Approved coursework beyond the MS degree (21 credits minimum).

Your studies must also be completed 5 years after the MS degree or the date of admission, whichever is later, unless a formal leave of absence is approved before the period for which the studies are interrupted.

In addition, you must take a written and oral departmental qualifying examination within the first 2 times it is offered after the date you join the doctoral program. Upon passing, you must then form a Ph.D. Guidance Committee and begin your dissertation. To do so, you will need to register for at least 3 credits of ME 9999 each fall and spring semester. Actual registration should reflect the pace of the work and your activity.

An exception to the minimum registration requirement may be made in the last semester of registration if that semester is devoted primarily to complete the work and dissertation. A dissertation grade of U for 2 consecutive terms affects whether or not you will be allowed to continue doctoral work. You must present progress on your dissertation to your guidance committee at least once a year.

˅ More Details

NYU Tandon School of Engineering - Mechanical Engineering, Ph.D.

  • GRE Required:  Register to view the details
  • Research assistantships:  Register to view the details
  • Teaching assistantships:  Register to view the details
  • Financial Aid: Register to view the details

What kind of scholarships are available for Graduate Programs in Mechanical Engineering?

We have 209 scholarships awarding up to $2,025,183 for Masters program in for Mechanical Engineering, targeting diverse candidates and not restricted to state or school-based programs.

Scholarship nameAmountCredibility
ASNT Fellowship Award$20,000High
Ada I. Pressman Memorial Scholarship$5,000High
GeneTex Scholarship Program$2,000High
ABC Humane Wildlife Women In STEM Academic Scholarship$1,000High
GMiS STEM Scholarships$500High

Find scholarships and financial aid for Mechanical Engineering graduate programs

$500 $20000

How can I compare the Mechanical Engineering Graduate Programs?

Compare the GRE score requirements, admission details, credit requirements and tuition for the Master's Program, from 374 universities offering Graduate PHD/Doctoral Programs in Mechanical Engineering. Compare Graduate PHD/Doctoral Programs in Mechanical Engineering

How will you rate the search results?

 0.0 rating, based on 0 reviews

Your review has been sent

Select rating
Your review must be at least 10 characters long
Your review must be not longer than 2000 characters