For admissions to masters degree program in Aerospace, Aeronautical and Astronautical and Space Engineering at Best Universities, GRE, GPA requirements are
Masters programs in Aerospace, Aeronautical and Astronautical and Space Engineering which do not require GRE
Aeronautics and Astronautics
College description: To be admitted to study for the degree of Doctor of Philosophy in Aeronautics and Astronautics, students must have fulfilled the requirements for the department Master of Science degree or its substantial equivalent.Applicants who have received their MS from other institutions may directly to the PhD program. Students who are currently pursuing the MS in the university department and wish to continue for the PhD should submit a graduate program authorization petition form online through Axess at the beginning of their last quarter in the master program.Before beginning dissertation research for the PhD degree, a student must pass the departmental qualifying examination. Admission to Stanford University for study beyond the master’s degree does not imply that applicant have been admitted to candidacy for the PhD — that special designation is reserved for students who have passed the department’s PhD Quals. After passing the exam, the student will then need to submit an approved program of PhD course work on an.Application for Candidacy for Doctoral Degree to the Student Services Office.A student who has completed fewer than 30 units may petition to take Quals.A student in the Aero Astro MS program who wishes to pursue doctoral study must take the qualifying examination in autumn or spring of the second year.
A completed MS degree is required to enroll in the AA-Eng program.See Honors Coop deadlines GRE general test scores required.A completed MS degree is required to enroll in the AA-PhD program.
Cornell UniversityRanked 15 in Best National University.
College description: The program emphasizes balance in aerospace science and technology, both basic and applied, to prepare students for the diverse opportunities at the frontiers of research, in contemporary industrial development, and in government agencies.Celestial mechanics:Kinematics and dynamics of orbital motion for planetary bodies and spacecraft behaviors of orbiting bodies among subtle gravitational sources, such as asteroids design of trajectories and timing for space-exploration applications.Spacecraft systems engineering: Conceiving, designing, implementing and operating space systems, which includes individual spacecraft as well as formations, constellations, and swarms analysis of and innovation in spacecraft architectures, including Earth-observing satellites studies in reliability, manufacturability, operability, and other features of contemporary space-system concepts.The field does not admit students into an M.S.-only degree program applicants may for the Ph.D. program with a bachelor degree. Typically the qualifying exam is taken at the end of the first semester for students entering with a Master degree and at the end of the first two semesters for those entering with a Bachelor degree.The professional degree of Master of Engineering provides a one-year course of study for those who want to develop a high level of competence in current technology and engineering design and who plan to practice engineering in industry or professionally.
This is the deadline for the applicant to submit the application—reasonable amount of time is allowed for letters of recommendation and official test scores to be received once the application has been submitted.Three letters of recommendation are required and should be sent electronically.Applicants are required to take the GRE general test a subject test is not required. GRE scores are valid for five years.TOEFL or IELTS exam is required of all international applicants from countries where English is not the official language unless the applicant has studied for at least two years in a country where English is the official language and the language of instruction was English.Official TOEFL scores must be sent directly from ETS to Cornell University. University minimums for the iBT version of the TOEFL are: Writing, 20 Listening, 15 Reading, 20 Speaking, 22.
Aerospace and Mechanical Engineering
College description: The Department of Aerospace and Mechanical Engineering offers Ph.D. and master's degrees as well as a program leading to combined Master's of Engineering and Juris Doctor degrees.
TOEFL or IELTS for non-native speakers of English.
MAE Graduate Admissions
College description: MAE 7540 Special Graduate Project in Mechanical or Aerospace Engineering: Advanced Level.Up to three credits of either this course or MAE 6594 may be applied toward the master’s degree. Prerequisite: Students must petition the department Graduate Studies Committee before enrolling.
The university combined graduate program offers the degrees of Master of Engineering , Master of Science , and Doctor of Philosophy in Mechanical and Aerospace Engineering. Both the MS and PhD are research degrees requiring independent research as reported in a final thesis defense, while the ME degree is a course-based degree with no research requirement. The university curriculum is designed to accommodate non-traditional students with degrees in scientific or engineering fields other than Mechanical or Aerospace Engineering. Students with degrees in electrical engineering, biomedical engineering, physics, mathematics, chemistry, and biology have been successful in the program.The university MAE Master’s of Engineering self-pay degree can allow applicant to finish their advanced degree within as little as one year. ME students cannot be supported by Teaching Assistantship or Research Assistantship during their ME degree program in MAE.What applicant Will Need applicant will be required to submit letters of recommendation and college transcripts. Students for whom English is not their native language are required to demonstrate proficiency in English by completing the TOEFL exam administered by the Educational Testing Service.
MS Mechanical Engineering MS Engineering Management
College description: MS in Mechanical Engineering USC Viterbi Prospective Students.ProgramsMaster’sMaster’s ProgramsAerospace and Mechanical EngineeringMS in Mechanical Engineering.The MS in Mechanical Engineering degree provides the technical education needed for engineering professionals in various industries such as aerospace, automotive, energy and power, utilities, petrochemical, design, manufacturing, and transportation. While the field of Mechanical Engineering encompasses this broad set of technical areas, this degree program encourages focused education in selected areas of interest.Please Note: Requirements for graduation, course offerings, course availability, track offerings, and any other degree requirements are subject to change.A minimum of 27 units is required for the MS in Mechanical Engineering degree.Remaining units can be courses from technical electives within selected program of studyOther common eligible majors include: Aeronautics, and Aerospace Engineering.Submit an electronic copy of official transcripts and other degree related documents through the online graduate applicationPlease review USC Graduate Admission Proficiency in English.The following is an of the tuition fees for graduate engineering students.Aerospace, Aeronautical and Astronautical and Space Engineering is also available online to professional engineers through . Because the program provides a fully equivalent academic experience, the degree a USC engineering student earns is the same whether they are on-campus or online.Elective courses may be from AME or other Engineering Departments.
ProgramsMaster’sMaster’s ProgramsAerospace and Mechanical EngineeringDual Degree MS Mechanical Engineering MS Engineering Management.Dual Degree: MS Mechanical Engineering MS Engineering Management.Epstein Industrial and Systems Engineering, offers programs leading to the degree of Master of Science in Mechanical Engineering Master of Science in Engineering Management.Please Note: Requirements for graduation, course offerings, course availability, track offerings, and any other degree requirements are subject to change.A minimum cumulative GPA of 3.0 is required for graduation.Submit an electronic copy of official transcripts and other degree related documents through the graduate applicationGRE General Test: Satisfactory and valid test scores. Valid GRE scores must be dated within five years of the start of the intended application semester.For possible exemption from additional language requirements, applicant must achieve an Internet Based TOEFL score of 90, with no less than 20 on each section or an IELTS score of 6.5, with no less than 6 on each band score.Because the program provides a fully equivalent academic experience, the degree a USC engineering student earns is the same whether they are on-campus or .
Admissions Guidelines Aerospace Engineering
College description: Advisory pre-requisite: Preceded by ENGR 101 and AEROSP 201, or graduate standingAdvisory pre-requisite: Graduate Standing or AERO 405Advisory pre-requisite: Graduate standing AERO 225 and AERO 325Advisory pre-requisite: Preceded by AEROSPACE 315 and 325Advisory pre-requisite: AEROSP 343 or graduate standing.Advisory pre-requisite: ENGR 101 and MATH 216, or graduate standing.Advisory pre-requisite: Graduate standingAdvisory pre-requisite: AEROSP 470 or graduate standing.Advisory pre-requisite: AEROSP 348 or graduate standing.Advisory pre-requisite: AEROSP 470 or graduate standingRequired pre-requisite: AEROSP 582 or AOSS 582 Advisory pre-requisite: Graduate standingAdvisory pre-requisite: MATH 419 or equivalent MATH 371 or equivalent graduate standing.Advisory pre-requisite: Graduate standing and permission of instructor.518 or equivalent and graduate standing.
GPA and GRE scores are very high, and project experience during the years is very common.The Graduate Admissions Committee looks at the complete application and is most interested in academic performance, GRE scores, research experience, good letters of recommendation, and the academic statement of purpose.Master’s degree decisions are sent out in March.
Online Master in Aerospace Engineering
College description: The master degree may be earned by completing semester hours of coursework, which must include 3 credit hours of Special Problems research credit. Alternatively, the candidate may elect to complete twenty-four semester hours of coursework along with nine hours of MS thesis work. In the latter option, the candidate must propose a thesis topic, complete the thesis, and successfully defend it before being awarded the degree. A GPA of 2.7 is required to graduate with an MS degree.Graduate students may specialize in the following areas: aerodynamics and fluid mechanics, aeroelasticity and structural dynamics, flight mechanics and control, propulsion and combustion, structural mechanics and materials behavior, and system design and optimization.Select 30 credit hours of coursework in Aerospace Engineering1.Select 24 credit hours of coursework in Aerospace Engineering.A combined BS MS honors program is also offered that prepares students for graduate studies and research.
The Master of Science in Aerospace Engineering is generally referred to as a designated degree.The only difference between these degrees is that the designated degree requires candidates to complete all coursework required for a bachelor of science in aerospace engineering.With some exceptions, international applicants must take and submit scores for the Test of English as a Foreign LanguageApplicant must submit standardized test scores, most commonly GRE or GMAT.Describe their specific career goals and objectives, the decision to pursue an advanced degree, and other information that may be useful to the admissions committee.All application materials, including transcripts and recommendations, must be submitted online and in English. Applicant are also required to submit an official Test of English as a Foreign Language score.International and domestic candidates that have relocated to the state of Georgia for purposes of full-time employment, as well as their spouses, may qualify for a waiver of the non-Georgia resident portion of tuition through the Economic Advantage Program.Test of English as a Foreign LanguageTOEFL scores are valid for two years and the minimum required total score on the exam is 100 for the internet-based TOEFL examAll applicants to the program must hold a the students.S. bachelor degree or equivalent to be considered for admission. A three-year degree is not equivalent to the the students.S. bachelor degree.
Graduate Admissions Mechanical and Aerospace Engineering
College description: The Doctor of Philosophy degree is a research-oriented degree, which requires individual study and specialization in a field or the interfacing of several fields. Generally, the degree constitutes an affidavit of aptitude in scholarship, imaginative enterprise in research, and proficiency in communication, including teaching.The MAE PhD program is intended to prepare students for a variety of careers in research and teaching. In general, there are no formal course requirements for the PhD.Click for a list of the different Majors within Mechanical and Aerospace Engineering.Then, the student must complete this form, which must be approved by the Chair of the MAE Graduate Affairs Committee.All PhD students entering the program are required to take, at minimum, 6 courses.The PhD Department Qualifying Examination is intended to determine a PhD candidate ability to successfully pursue a research project at a level appropriate for the doctoral degree.A PhD student must take the DQE before the end of their second full year in the program The DQE is required of all PhD students, regardless of previous institution or degree level. A written or oral M.S. examination or a preexisting M.S. degree do not serve as substitutes for the DQE.Upon successful completion of this examination, students are advanced to candidacy and are awarded the Candidate in Philosophy degree.
Graduate Record Exam test scores.A minimum of three letters of recommendation. The university accept letters of recommendation only.International applicants only: Scores for the TOEFL or IELTS Academic Training exam to demonstrate proficiency in the English language.Applicants who are applying for admission to MAE should take the GRE exam as early as possible.Applicant do not need to send official GRE scores to us until applicant are offered admission.GRE scores are good for five years.The MS and PhD program has a minimum GPA requirement of 3.0 on a 4.0 scale. However, the typical GPA for admission is 3.50 or higher.Test of English as a Foreign LanguageAll international applicants whose native language is not English and whose education was conducted in a language other than English must take the TOEFL. Those with the status permanent resident do not need to take the TOEFL.Minimum TOEFL requirements for admission are: IBT 85, paper-based 550 IELTS 7.Official admission to graduate study at the university is contingent upon review of an applicant record, receipt of final transcript showing degree awarded, an affirmative recommendation by the department and action by the UC San Diego Graduate Division.
Dept.of Mechanical and Aerospace Engineering
College description: Earn their master in mechanical engineering entirely online.The department also offers a track of study within the Master of Science degree in Mechanical Engineering that focuses on Fire Science and Engineering. Additionally, students can earn their master degree in Mechanical Engineering 100% online.Degree requirements and course descriptions for both the Master of Science and the PhD in Mechanical Engineering and Aerospace Engineering can be reviewed in the university General Bulletin.In addition, research funds are used to provide assistantships that support the thesis research of graduate students.The department believes that the success of its graduates at all levels is due to emphasis on project and problem-oriented course material coupled with the broad-based curricular requirements.Each M.S. student may select either Plan A which requires a research thesis or Plan B which does not require a thesis. Thesis or dissertations in all programs must be original contributions to the existing body of knowledge in engineering and science.The minimum scores to be switched to a Research Focused or Project Focused Masters are 7.0 IELTS or 90 TOEFL. If their applicant is able to acquire the 90 TOEFL 7.0 IELTS before admission, the university can change their admission letter and admit them to a Research or Project Masters.
Degree requirements and course descriptions for both the Master of Science and the PhD in Mechanical Engineering and Aerospace Engineering can be reviewed in the university General Bulletin.In addition, the minimum scores to gain admission to a Course Focused MS are 6.5 IELTS or 80 TOEFL. The minimum scores to be switched to a Research Focused or Project Focused Masters are 7.0 IELTS or 90 TOEFL. If their applicant is able to acquire the 90 TOEFL 7.0 IELTS before admission, the university can change their admission letter and admit them to a Research or Project Masters.A detailed set of rules and regulations for each degree program contained here is available from the department.To maintain the high quality of the university graduates, the university require the GRE General exam and the TOEFL exam where applicable.Applicants are expected to have their or M.S. degrees in Mechanical Engineering, or Aerospace Engineering or related areas from a reputable university. The GRE is a departmental requirement all incoming students must take. The Graduate Record Examination Quantitative score should be at least in the 80th percentile or higher.The GRE is valid for five years after the test date.Test of English as a Foreign Language internet based: 90.Test of English as a Foreign Language internet based: 80.It is suggested that recommendations come from those sufficiently familiar to assess their academic preparation, abilities and accomplishments. If for some reason this feature doesn’t work, applicant will find a recommendation form on the instructions page, please send this to their recommenders to complete, they can also attach a separate letter.What is the minimum TOEFL score needed A.What is the minimum GRE score needed A.What is the minimum GPA score needed A.If their country uses a percentage system please convert that score for the GPA.What is their institutional number for ETS to send the official GRE and TOEFL test scores A.Their recommenders can uplaod their recommendation letters to the applicaiton portal.
Mechanical and Aerospace Engineering MS
College description: The university research and teach at the interface of ideas, where several disciplines such as physics, math, electronics, materials, computer science, and engineering intersect in the spry hands of broadly trained MAE UCI engineers.Mechanical Engineering has become a interdisciplinary field as machines have changed, bringing mechanical engineers into collaboration with engineers from other engineering disciplines as well as researchers working in pure science fields.The University of California-Irvine does bioimaging, bioinstrumentation and design, implantable prosthetics, biomaterials and tissue engineering, and biomechanics.If applicant have a genuine interest in doctoral studies, the university recommend that applicant directly to the Ph.D. program.Mark Walter, Ph.D. California Institute of Technology, Lecturer with Security of Employment of Mechanical and Aerospace Engineering
For applicants to the university M.S. program, the university follow the campus criterion of a minimum GPA of 3.0 based on a 4.0 scale however, because of the highly competitive nature of admissions, the cutoff can be considerably higher and is currently around 3.3 4.0.There is no formal minimum GRE score.The campus requirement for minimum TOEFL is 80 on the internet based test and at least 550 on the paper-based test However, the university expectation is a TOEFL score of at least 95. Students can fulfill this requirement by passing one of the following exams: TSE, TOEFL , SPEAK, or TOEP.
Aerospace Engineering University of Illinois
College description: Soumendu Bagchi, Aerospace Engineering, Exploiting Moiré Effects to Control Plasma-Patterning of Twisted Bilayer Graphene .
The Aerospace Engineering offers graduate programs leading to the degrees of Master of Science and Doctor of Philosophy.Typically, the prerequisite for graduate study is the equivalent of the B.S. in Aerospace Engineering however, graduates of curricula leading to degrees in other fields of engineering, the physical sciences, or mathematics may also be admitted to advanced study. However, having a GPA higher than the minimum is no guarantee of admission. Scores on the Graduate Record Examination general test are required of all applicants.All applicants whose native language is not English are required to submit a minimum TOEFL score of 103 , 257 , or 613 minimum International English Language Testing System academic exam scores of 7.0 overall and 6.0 in all subsections. No exemptions from the TOEFL are granted by the department. Applicants wishing to be considered for teaching assistantships must score 24 on the SPEAK portion of the TOEFL exam.In addition, graduate students making satisfactory progress toward their degrees may also be considered for . All applicants, regardless of the students.S. citizenship, whose native language is not English and who wish to be considered for teaching assistantships must demonstrate spoken English language proficiency by achieving a minimum score of 24 on the speaking subsection of the TOEFL iBT or 8 on the speaking subsection of the IELTS.The degree requirements are the same as for the on-campus non-thesis M.S. program—32 hours of course work—and the degree awarded to students is the same degree awarded to resident students.Students in this unit may choose to earn their major degree and simultaneously complete an M.B.A., with 12 fewer required hours than when pursuing both degrees independently. Students must be enrolled in the M.B.A. program for three terms and complete all the requirements of their primary degree.
College description: Interaction of elastic systems having several degrees of freedom with fluid flows in various configurations.AERSP 518: Dynamics and Control of Aerospace Vehicles.Applications of classical celestial mechanics to space flight planning. AERSP 550 Astrodynamics This course covers the mathematics and practices in orbital mechanics as applied to space mission analysis, design and operation.Other topics may be covered as time permits.Provides an opportunity for supervised and graded teaching experience in aerospace engineering courses.
Or M.S. student must hold a bachelor degree in engineering, physical science, or mathematics, and may be required to complete course work in fluid and solid mechanics and intermediate mathematical analysis, if not already completed. The department will consider students with a 3.0 junior senior grade-point average on a 4.0 scale students with special backgrounds, abilities, or interests may request a waiver to this GPA requirement.Admission to the Ph.D. program prior to completion of a master degree may be considered upon the student passing the Ph.D. qualifying exam. A student must have completed at least 18 course credits beyond the baccalaureate degree in order to take the Ph.D. qualifying exam, and is not granted official status as a doctoral candidate until the comprehensive exam has been passed.Degree is a non-thesis professional master’s degree. At least 18 credits in Aerospace Engineering courses are required, and a student may count a maximum of 9 credits of 400-level course work toward the degree.A student may count a maximum of 6 credits of 400-level course work toward the degree.There is no foreign language requirement for the Ph.D. degree however, students must demonstrate proficiency in reading, writing, and speaking English through an examination administered by the department. The student Ph.D. committee decides which, if any, courses are required in addition to those specified in the core requirements this typically involves 24 course credits beyond the M.S. degree.The final oral examination, which is related mainly to the dissertation, is given after the candidate has satisfied all other degree requirements.
Admissions Mechanical Aerospace Engineering
College description: A total of 30 credit hours is required for the Master’s degree. For the Master’s degree with thesis degree option, this includes a minimum of 24 credits of graded coursework and a maximum of 6 credits of thesis research For a student pursuing a non-thesis degree option, a total of 30 graded credit hours is required. For both the thesis and non-thesis degree, up to 6 credits of coursework at the 3000 or 4000 level from another department may be taken and used to satisfy degree requirements However, 3000 and 4000 levels with the EGN suffix are not considered outside of the major, and therefore, shall not be considered for graduate credit.Two six-credit minors may be taken. The number of credits of non-structured courses is limited to 4 course semester hours toward a master’s degree. To exceed this limit, a petition for waiver must be filed with the approval of the advisor and committee and approved by the Graduate Committee.The exam may not be scheduled earlier than the term in which the degree is to be conferred. All MS degree program students who apply for degree certification will be automatically enrolled in the final examination.Please consult the MAE Graduate Policy Handbook for complete requirements.The Ph.D. is a research oriented degree requiring independent mastery of a field of knowledge.
ADMISSION REQUIREMENTS FOR MASTER’S DEGREEA baccalaureate degree in Mechanical Engineering or in Aerospace Engineering, or baccalaureate degree in a closely related engineering discipline from an ABET accredited program.A minimum combined score of 301 for the GRE® Verbal and Quantitative portions with minimum of 151 Quantitative.International applicants are required to have a TOEFL score of 80 internet-based, 213 computer-based, or 550 paper-based.The master’s program must have been completed with a GPA of 3.5 or higher.A minimum combined score of 301 for the GRE® Verbal and Quantitative portions with minimum of 155 Quantitative.Conditional admission is rarely used for Ph.D. students in MAE
Mechanical and Aerospace Engineering
College description: Master of Science in the Field of Mechanical and Aerospace Engineering.The master of science in the field of mechanical and aerospace engineering degree program offers a rigorous course of study that helps prepare students for leadership roles in government and industry.Normally, no than two courses taken outside the Mechanical and Aerospace Engineering may be counted toward the requirements for the graduate degree. In special circumstances this may be changed with the approval of the advisor.Numerical Solution Techniques in Mechanical and Aerospace Engineering.Remaining credits are taken as elective courses in aeroacoustics, aeronautics, astronautics, propulsion, or space systems.Remaining credits are taken as elective courses in computer-aided design, computer-integrated design and manufacturing, mechanical engineering design, or robotics.
The fers Ph.D. and M.S. degrees, as well as two professional degrees.Students may transfer all of their certificate courses’ credits to the M.S. program if they subsequently decide to pursue a master’s degree.The Graduate Record Examination is required of all applicants. Competitive quantitative scores are in the 90th percentile competitive verbal scores are in the 50th percentile.TOEFL: 550 on paper-based or 80 on Internet-based applicants requesting funding consideration must have 600 on paper-based 100 on Internet-based .Three recommendations required for Ph.D. applicants and two recommendation required for M.S. applicants ing for fellowships assistantships. Two recommendations required for all other applicants.