For admissions to masters degree program in Electrical and Electronics Engineering at Best Universities, GRE, GPA requirements are
Online Masters in Electrical and Electronics Engineering No GRE
Masters programs in Electrical and Electronics Engineering which do not require GRE
Electrical Systems Engineering at WashU
College description: The Master of Science in Electrical Engineering is an academic master degree designed mainly for both full-time and part-time students interested in proceeding to the departmental full-time doctoral program and or an industrial career. Under the course option, students may not take ESE 599 Master Research.Candidates for this degree must complete a minimum of 24 unit hours of course instruction and 6 units hours of thesis research 3 of these unit hours of thesis research may be applied toward the 15 core electrical engineering unit hours required for the MSEE program. Any of these 6 hours of thesis research may be applied as electives for the MSEE, MSSSM, MSDAS, MCEng and MEngR programs. The student must write a master thesis and defend it in an oral examination.ESE 415 OptimizationESE 513 Convex Optimization and Duality TheoryESE 516 Optimization in Function SpaceESE 519 Convex Optimization ESE 520-529 Applied probability category ESE 530-539 Applied physics and electronics category ESE 540-549 Control category ESE 550-559 Systems category ESE 560-569 Computer engineering category ESE 570-579 Communications category ESE 580-589 Signal and image processing categoryESE 599 Master ResearchThe remaining courses in the program may be selected from senior or graduate-level courses in ESE or elsewhere in the university that are approved by the department.A maximum of 6 credits may be transferred from another institution and applied toward the master degree.
The Electrical and Systems Engineering department offers the following Master’s degrees as well as a certificate in Imaging Science. The degrees may be pursued with a course only or thesis option.This option is intended for those employed in local industry who wish to pursue a graduate degree on a part-time basis, or for full-time students who do not seek careers in research.Knowledge of a scientific or quantitative social science field is encouraged but not necessary for success in the MSDAS program.Admitted students typically have an average score greater than 90% on the quantitative section and 3.0 or greater on the analytical section. International students must also submit TOEFL scores earned within the past two years. Admitted students typically have composite scores of 95 or greater.Letters of recommendation from research mentors are a particularly important part of the graduate application. Descriptions of previous research experience or future research goals in the personal statement portion of the application are also important in the admissions decision.
Admission Requirements — Electrical Engineering
College description: In this course, Maxwell equations are applied to practical problems encountered in the design of digital electronics, communications networks, and photonics.The fundamental physics and engineering of photonic devices will be explored in this class.Principles of parameter detection and estimation with applications to engineering and statistics.The course focuses on those aspects of quantum theory that are of particular relevance to electrical engineering. It is intended to give seniors and first-year graduate students a working knowledge of quantum mechanics at a level sufficient to illuminate the operation of standard and advanced quantum devices.The goal of this seminar is to give first-year graduate students interested in the systems aspects of electrical engineering insight into the research process.This seminar course introduces first-year graduate students to Notre Dame research in Electronic Materials and Devices.The class will provide graduate students with a solid understanding of the basic underlying physics of semiconductors that lead to practical applications.The bachelor’s degree programs in aerospace, chemical, civil, computer, electrical, environmental, and mechanical engineering are accredited by the Engineering Accreditation Commission of ABET, Inc. The bachelor’s degree program in computer science is accredited by the Computing Accreditation Commission of ABET, Inc.
An applicant for admission to the graduate programs in electrical engineering must hold a bachelor degree or its equivalent from an accredited American college or university, or from a foreign institution of acceptable standing.Most applicants to this department have degrees in electrical engineering. However, it has been the university experience that individuals with degrees in physics, mathematics, chemistry and related scientific and technical areas are able to complete a graduate program in electrical engineering.All applicants are required to take the General Test of the Graduate Record ExaminationInternational applicants are required to furnish TOEFL or IELTS test scores.No separate forms are necessary to for financial aid.
Electrical Engineering Graduate Handbook
College description: UVA Engineering Tapped to Lead $29.7 Million National Center.Electrical and Computer Engineering: Delivering innovative, cross-disciplinary technologies that address society’s grand challenges.Electrical and computer systems are fundamental to modern life, from smart energy management to mission-critical defense systems, from wireless communications to life-saving healthcare devices. Brown Electrical and Computer Engineering is distinguished by its highly collaborative culture as well as its core strengths in areas like terahertz and photonic devices, low-power digital systems, signal and image processing, and advanced controls.Their First Encounters Were Detectors Developed at UVA Engineering.UVA Engineering Researcher Brings Machine Learning to 5G.Brown Electrical Computer Engineering, Dean Engineering Applied Science, The George Washington University.
The Electrical and Computer Engineering offers programs of study leading to the M.E., M.S. and Ph.D. degree. Graduate students, together with their advisor, are responsible for planning a course of study leading to a desired degree. The EE Graduate Office and SEAS Graduate Office are charged with ensuring that the appropriate degree requirements are met.The EE Graduate Committee is responsible for tracking their academic progress.A graduate student will be considered to be on probation if their cumulative GPA for graduate work is less than 3.0 and will be notified of this situation by the Dean Office. A graduate student will be subject to dismissal if the cumulative GPA is not raised to 3.0 within one semester.Students in the Commonwealth Graduate Engineering Program may include up to 15 hours of credit with grades of C or better from participating institutions This form is required for transferring courses along with a catalog statement of course level and the grading system that justifies classification of these courses as graduate-level courses.PhD candidates who have completed a Master’s degree may that degree toward the requirements of the PhD.If a course is repeated both grades are used in the GPA calculation.This test is in addition to the TOEFL and the UVELPE required of all international graduate students.The department offers two master degrees, a Master of Science that requires a thesis, and a Master of Engineering that does not. Students enrolled in the MS program must obtain the agreement of an advisor to supervise a Master’s thesis.A) Students entering without a Master’s degreeUpon receipt of the ME degree, students will be expected to take an additional 12 graded credits to complete the PhD requirement, for a total of 42 graded credits.Students who have a master’s degree must take the qualifier in the second semester of their studies. Students who have an degree must take the qualifier in the third semester of their studies.Subject to the approval of their advisor, an M.E. student may include up to six hours of project work toward their degree program. MS and Ph.D. students cannot use 6995 or 7995 to fulfill degree course requirements.As with all graduate-teaching positions at UVa the student must have passed the SPEAK Test in order to fulfill this graduation requirement.All students conducting research as part of their degree requirements should enroll in one of these classes to maintain a formal record of their research progress.The project supervisor and the student should discuss what is to be expected from the student during the employment period and the student should expect to make a progress report every week.
MS Electrical Engineering MS Engineering Management
College description: MS in Electrical Engineering USC Viterbi Prospective Students.ProgramsMaster’sMaster’s ProgramsElectrical and Computer EngineeringMS in Electrical Engineering.Graduates of the MS in Electrical Engineering will have the professional skills necessary to compete effectively in a world of rapid technological change as well as to assume leadership roles within industrial, entrepreneurial, academic, or governmental environments in the broad context of electrical engineering.Please Note: Requirements for graduation, course offerings, course availability, track offerings, and any other degree requirements are subject to change.A minimum of 28 units is required for the general MS in Electrical Engineering degree.Minimum number of units in electrical engineering: 20 units.No than 3 courses at the 400 level may be counted toward the degree.To achieve a degree of breadth in their program, students are encouraged to take two technical courses outside their area of specialization but within EE.Submit an electronic copy of official transcripts and other degree related documents through the online graduate applicationPlease review USC Graduate Admission Proficiency in English.The following is an of the tuition fees for graduate engineering students.Electrical and Electronics Engineering is also available online to professional engineers through . Because the program provides a fully equivalent academic experience, the degree a USC engineering student earns is the same whether they are on-campus or online.At least 20 units must be taken in electrical engineering, those not in EE require written adviser approval and must be technical in nature.
Please Note: Requirements for graduation, course offerings, course availability, track offerings, and any other degree requirements are subject to change.GRE General Test: Satisfactory and valid test scores. Valid GRE scores must be dated within five years of the start of the intended application semester.For possible exemption from additional language requirements, applicant must achieve an Internet Based TOEFL score of 90, with no less than 20 on each section or an IELTS score of 6.5, with no less than 6 on each band score.All courses counted towards the dual degree must be at the 500 level, except those 400-level courses required by the master’s degree in electrical engineering.
Tufts UniversityRanked 27 in Best National University.
College description: Tufts trains electrical engineers to excel in fields that range from image and signal processing to nanoscale engineering. Graduates of the M.S. program in electrical engineering go on to great things: founding start-ups, advancing society and industry, and studying in highly ranked Ph.D. programs, all supported by their Tufts education.The Signal and Systems track of the Bioengineering Master program educates biotechnology engineers in analysis and processing of signals with an emphasis on biomedical image processing and image formation and design, control and synthesis of systems for biotechnologyDual Degree Master ProgramDevelop their innovation, leadership and management skills and build their technical depth with the Dual Degree Master Program. Applicant’ll earn two degrees: an M.S. offered by the Electrical Engineering, and an M.S. Innovation Management Applicant earn both degrees in an accelerated time frame and at a reduced cost.The Microwave and Wireless Certificate program is open to students with a bachelor degree in electrical engineering or physics or with equivalent preparation, including a background in general physics and intermediate circuit theory.Computer Architecture, Parallel Processing, Computer Networking, Hardware Description Languages, Simulation and Programmable Logic Design, Engineering Education.Digital Image Processing, Computer Animation, Swarm Robotics, Innovation, Engineering Method Design.Signal Analysis, Digital Signal Processing, Audio Engineering, Electromagnetic Theory.Analytical and Experimental Work Involving Modeling, Control, and Estimation in Electric Energy Processing, Power Electronics, Power Systems, and Electric Drives.The Interaction of Light with Matter, Physics of Nanostructures and Interfaces, Semiconductor Photonics and Electronics, Epitaxial Crystal Growth, Special Interest in the Area of Materials and Devices for Energy and Infrared Applications.Applicants to the graduate program are expected to have a degree at the level of bachelor’s or master’s in electrical or computer engineering, or a related discipline such as computer science, physics, or mathematics.
Applicants to the graduate program are expected to have a degree at the level of bachelor’s or master’s in electrical or computer engineering, or a related discipline such as computer science, physics, or mathematics.GRE not required for current Tufts applying to the M.S. degree program.GRE scores may be waived for part-time students with five years of industry experience who are the students.S. citizens or permanent residents.
Master in Electrical Engineering
College description: The breadth and depth of the university quality graduate program build upon a firm ground of the basics and advance their cutting-edge technical knowledge.Georgia Institute of Technology-Main Campus has the largest ECE graduate academic program in the United States.The university graduates are among the most sought-after in the world, employed with the world top high-tech companies and research universities and in governmental agencies and small businesses.ECE graduate degree options at Georgia Tech include the M.S.E.C.E. non-thesis option, the M.S.E.C.E. thesis option, and the Ph.D. Students interested in interdisciplinary degrees may work towards an M.S. in Cybersecurity or Bioengineering.Thesis degrees may be pursued at the main Georgia Tech campus in Atlanta, Georgia Georgia Tech Shenzhen in China and Georgia Tech-Lorraine in France. Additionally, the M.S. degree can be obtained anywhere in the world through the university distance learning degree program.Georgia Tech Lorraine and Georgia Tech Lorraine Double Degree Program.
With some exceptions, international applicants must take and submit scores for the Test of English as a Foreign LanguageApplicant must submit standardized test scores, most commonly GRE or GMAT.Describe their specific career goals and objectives, the decision to pursue an advanced degree, and other information that may be useful to the admissions committee.All application materials, including transcripts and recommendations, must be submitted online and in English. Applicant are also required to submit an official Test of English as a Foreign Language score.International and domestic candidates that have relocated to the state of Georgia for purposes of full-time employment, as well as their spouses, may qualify for a waiver of the non-Georgia resident portion of tuition through the Economic Advantage Program.Test of English as a Foreign LanguageTOEFL scores are valid for two years and the minimum required total score on the exam is 100 for the internet-based TOEFL examAll applicants to the program must hold a the students.S. bachelor degree or equivalent to be considered for admission. A three-year degree is not equivalent to the the students.S. bachelor degree.
Electrical Engineering MS
College description: Electrical Engineering Concentration: researching optical and solid-state devices, including quantum electronics and optics, integrated electro-optics and acoustics, design of semiconductor devices and materials, analog and mixed-signal IC design, radio frequency, antennas, microwave and microwave devices, and scanning acoustic microscopy systems engineering and signal processing, including communication theory, machine vision, signal processing, power electronics, neural networks, communications networks, systems engineering and control systems.The department is committed to an integrated view of the electrical engineering field ranging from microscopic devices all the way to architectures, communications and software design everything from electrons to programs.However, a basis of knowledge is important when considering any graduate studies.However, applicant only need to submit test scores, such as GRE or TOEFL once, then UCI Graduate Division will distribute the scores electronically to each program application.If applicant have any further questions that may not have been answered from this page, please visit UCI Graduate Division page.
The required minimum GPA to is a 3.0 on a 4.0 the students.S. Scale.Applicant will need to submit a separate application, application fee, letters of recommendation, and transcripts for each program. However, applicant only need to submit test scores, such as GRE or TOEFL once, then UCI Graduate Division will distribute the scores electronically to each program application.A completed application is required and consists of application, GRE scores, reference letters, and transcripts, etc.All domestic students should fill out the FAFSA to become eligible for fellowships and to become eligible for loans, if necessary.
Electrical Engineering, Ph.D. University of Wisconsin-Madison
College description: This is a named option in the Electrical Engineering M.S.The Master of Science in Electrical Engineering degree with a named option in Professional is designed to deepen the student’s technical knowledge and sharpen their professional skills for a well-prepared entry into industry. Areas of emphasis include computer engineering, fields and waves, solid state photonics, or energy and power systems.The Professional program is intended for students looking for an advanced entry into an electrical engineering career in industry. Motivated students can complete all the requirements for the degree in a predictable 16-month timeframe.The combined focus on technical skills and professional development will prepare graduates to assume leadership positions in industry.If applicant want to complete their degree in 16 months and enter the workforce, then the Professional program is right for applicant.Once applicant have researched the graduate program applicant are interested in, online.Electrical and Electronics Engineering does not admit in the spring.Electrical and Electronics Engineering does not admit in the summer.Applicants who have earned, or will be earning before starting the program, a bachelor degree from UW-Madison are exempt from submitting a GRE test score.An applicant must have a bachelor degree from a regionally accredited the students.S. institution or a comparable degree from an international institution.Please do not convert their grades to a 4.0 scale.Graduate Record Exam general test scores are required for all applicants.Resources to help applicant afford graduate study might include assistantships, fellowships, traineeships, and financial aid.Hence, students in the program are expected to focus all of their time on their coursework and are not allowed to accept tuition-waiving assistantships or seek dual or double degrees.Half of degree coursework must be completed graduate-level coursework courses with the Graduate Level Coursework attribute are identified and searchable in the university Course Guide.Students may take courses from combinations of different paths to create custom degrees that are well-aligned with their professional goals.1.Special topics courses E C E 601 Special Topics in Electrical and Computer Engineering or E C E 901 Special Topics in Electrical and Computer Engineering may be used for up to 3 credits towards a curriculum path with advisor approval.No than 3 independent study credits count toward the degree.The on-campus program, not the online MSEE Power Engineering program.With assistance from Engineering Career Services, obtain a summer internship and enroll in up to 2 credits of E C E 702 Graduate Cooperative Education Program.Enroll in the summer course INTEREGR 601 Topics in Interdisciplinary Engineering.The Graduate Program Handbook is the repository for all of the program policies and requirements.With program approval, students are allowed to count no than 9 credits of graduate course work from other institutions.
The ECE Ph.D. program typically requires five years of study beyond the bachelor degree, although the exact time to degree completion varies depending on research progress.Applicants who have earned, or will be earning before starting the program, a bachelor degree from UW-Madison are exempt from submitting a GRE test score.An applicant must have a bachelor degree from a regionally accredited the students.S. institution or a comparable degree from an international institution.Applicants must also obtain three letters of recommendation for consideration.Graduate Record Exam general test scores are required for all applicants. UW students, specifically those who have a B.S. degree in electrical engineering or computer engineering, may be exempt from the GRE requirement.Please note that it is highly advised to take the GRE and TOEFL IELTS tests well in advance of the deadline to ensure time for receiving and processing the scores.A grade of BC in an E C E course is acceptable, provided the total cumulative GPA for graduate E C E courses is greater than or equal to.3.00.3. Outstanding Incompletes must be resolved before a degree is granted.As soon as a student has passed all the requirements for the Ph.D. degree , the student is classified as a Dissertator.These tracks are internal to the program and represent different pathways a student can follow to earn this degree.Courses used for exemption may not be used to satisfy other Ph.D. degree requirements such as the Secondary Area Course Requirement or the Minor Requirement.Ph.D. degree seeking students must take 1 credit of E C E 610 in the Fall semester of which they are entering the program and 2 credits of E C E 611 in the following Spring semester. Due to the additional credits, these seminar credits will count toward the 51 credits required by the Ph.D. degree.With program approval, students are allowed to count graduate coursework from other institutions toward the minimum graduate degree credit requirement and the minimum graduate coursework requirement. Coursework earned ten or years prior to admission to a doctoral degree is not allowed to satisfy requirements.With program approval, students may count up to 7 credits of coursework from a bachelor of science degree in Electrical Engineering, Computer Engineering, Electrical and Computer Engineering, Electrical Engineering and Computer Science, or Computer Science from an ABET-accredited program at other institutions toward fulfillment of minimum degree requirements.Coursework earned five or years prior to admission to a master’s degree is not allowed to satisfy requirements.All incomplete grades must be resolved before a degree is granted.Doctoral degree students who have been absent for ten or consecutive years lose all credits that they have earned before their absence.
College description: Theory and application of boundary value problems in engineering electromagnetics topics include microwave and optical waveguides, radiation, and scattering.Physical principles and experimental methods used to characterize the electrical, optical, structural and chemical properties of semiconductor materials.This course will count as an elective for electrical engineering students in the electronics and photonics sub-discipline.Analytical methods are developed using the vector space approach for solving control and estimation problems examples from different engineering applications. E E 550 Foundations of Engineering Systems Analysis This 3-credit course is offered at the first-year graduate level and provides a systems-theoretic background for advanced graduate courses in the disciplines of engineering and science. The course uses the vector space approach to develop the analytical foundations for solutions of science and engineering problems in diverse application areas such as optimal control, estimation, and signal processing. Finally, diverse applications of these various techniques are presented throughout this course to illustrate the wide range of engineering problems that can be solved using the vector space approach.Scientific and engineering principles of microwave radar remote sensing of land, sea, and the atmosphere.This course covers the application of advanced power electronics in power apparatus. Electrical machines are the main components of the smart grid system.
A prospective graduate student in Electrical Engineering at Penn State Harrisburg must fulfill the admission requirements as set forth by Graduate Council, and have a bachelor of science degree in an electrical engineering program accredited by the Accreditation Board of Engineering and Technology , or the equivalent. Exceptions to this will be based on professional experience and other factors such as GRE scores. Up to 15 credits earned in three semesters or fewer, as a nondegree student, may be applied toward the master degree, subject to restrictions outlined in GCAC-309 Transfer Credit.Those applying for admission as a Master of Engineering student without an electrical engineering degree may be admitted with the stipulation that deficiencies in background, if any, will be remedied early in the program and that these courses will be in addition to the required number of credits for the degree.Test scores from the Graduate Record ExaminationsTest scores from the Graduate Record Examination are required ONLY for those applicants indicating interest in an assistantship.English proficiency test scores may be required for international applicants.An cumulative grade-point average of 3.0 or better on a 4.0 scale, and scores from the GRE are required for admission.Three letters of professional recommendations from individuals who can evaluate the applicant’s potential.Test scores from the Graduate Record ExaminationA total of 30 credits is required for a Master of Engineering degree, of which at least 21 must be taken through Penn State Harrisburg engineering graduate programs.Students in the IUG program must satisfy the degree requirements for both Bachelor of Science and Master of Science degrees. However, the total course load is reduced due to the maximum of 12 credits that can count towards both degrees. A minimum of 7 credits proposed to count for both degrees must be at the 500 level. The fourth year of the IUG program differs from the fourth year of the Bachelor of Science program due to the courses that count toward the Master of Science Degree requirements.Students who have not maintained a 3.4 GPA in their Math and Electrical Engineering courses will be put on probationary status with respect to the IUG program.If for any reason a student admitted to the IUG program is unable to complete the requirements for the Master of Science degree, the student will be permitted to receive the Bachelor of Science degree assuming all the degree requirements have been satisfactorily completed. If students successfully complete courses listed in the recommended schedule, they will satisfy the requirements for the Bachelor of Science degree by the end of their fourth year.Three letters of professional recommendation from individuals who can evaluate the applicant’s potential.Students will be admitted no later than the end of the second week of the semester preceding the semester of expected conferral of the degree, as specified in the proposed IUG plan of study.Students must sequence their courses so all degree requirements are fulfilled before taking courses to count solely towards the graduate degree.Up to 12 credits may be double-counted towards the degree requirements for both the graduate and degrees a minimum of 50% of the double-counted courses must be at the 500 or 800 level. Credits associated with the culminating experience for the graduate degree cannot be double-counted.World Campus students in graduate degree programs may be eligible for financial aid.
College description: Master of Science , Applied Scientist , Engineer , Doctor of PhilosophyGW Electrical and Computer Engineering offers the Ph.D. and M.S. degrees and two professional degrees in electrical engineering. Graduate students choose focus areas from the following: applied electromagnetics communications and networks electrical power and energy electronic, photonics, and MEMS signal and image processing systems and controls.GW’s doctoral program is designed to prepare students for careers of creative scholarship by providing focused knowledge in the students’ chosen area of specialty and guidance for research.Students in the university master’s program benefit from a flexible schedule that includes both late afternoon and evening classes. Additionally, students may choose a thesis or non-thesis option.The Graduate Record Examination is required of all applicants.Applicants with degrees from Indian universities should upload transcripts and or detailed marksheets.And App.Sc.: In an essay of 250 to 500 words, state their purpose in undertaking graduate study at The George Washington University describe their academic objectives, research interests, and career plans and discuss their related qualifications, including collegiate, professional, and community activities, and any other substantial accomplishments not already mentioned.Received a bachelor’s degree in engineering, a physical science, mathematics, computer science, business administration, or information technology from a regionally accredited institution.Applicant must posses a baccalaureate or master’s degree in an appropriate area from an accredited institution.
GW Electrical and Computer Engineering offers the Ph.D. and M.S. degrees and two professional degrees in electrical engineering.The Graduate Record Examination is required of all applicants.TOEFL: 550 on paper-based or 80 on Internet-based applicants requesting funding consideration must have 600 on paper-based 100 on Internet-based .Three recommendations required for Ph.D. applicants and two recommendation required for M.S. applicants ing for fellowships assistantships. Two recommendations required of all other applicants.