For admissions to masters degree program in Industrial Engineering at Best Universities, GRE, GPA requirements are
Masters programs in Industrial Engineering which do not require GRE
Industrial Engineering Management Sciences
College description: The Industrial Engineering and Management Sciences PhD Program produces researchers who combine strength in core methodologies of operations research with the ability to them to yield practical benefits in solving problems that are important in the real world.Areas of specialization include Analytics, Stochastic Analysis Simulation, Optimization, Financial Engineering, Logistics Operations, Healthcare Engineering, Applied Statistics Statistical Learning, and Management Science.Applicants must have a bachelor or master degree in a relevant discipline, but need not have a degree in industrial engineering. The program has attracted students of applied mathematics, computer science, economics, finance, mathematics, physics, statistics, and most other engineering disciplines.See the Industrial Engineering and Management Sciences Degree Requirements for specific classes and procedures needed to complete this program.
GRE-Analytical Writing score of 4.0 or higher is desirable. A score of 3.0 is poor.If applicable, a score of at least 90 on the internet-based TOEFL, 600 on the paper-based TOEFL, or 7.0 on the IELTS is required.It is difficult to give precise guidance what this means because the grading schemes, curricula, and selectivity of different colleges vary greatly.Many successful applicants did not have substantial research experience, but most of them were able to demonstrate their potential for research with letters of recommendation.The Industrial Engineering and Management Sciences prefers letters of recommendation that attest to the applicant potential to grow into an independent researcher and suitability for mathematically challenging PhD coursework.All applications must be accompanied by scores on the Graduate Record Examination aptitude test.For international applicants whose native language is not English, evidence of ability in English must be demonstrated by achieving a minimum score of 90 on the internet-based TOEFL, 600 on the paper-based TOEFL, or 7.0 on the IELTS.If applicant are taking the TOEFL or GRE be sure to include this number on their test form.TOEFL Internet-based test takers should, when prompted, request that their scores be sent to the graduate office , and then select the program name that most closely matches their program of interest.
MS Industrial and Systems Engineering MBA
College description: Industrial Systems Engineering USC Viterbi Prospective Students.
The Master of Science in Industrial and Systems Engineering Master of Business Administration dual degree program is for students who want an extended graduate program with depth in both business and engineering. Normally, earning two such degrees would require completing at least 84 units of courses and as many as 93 units, depending on the amount of coursework relevant to both programs. This special dual degree option requires 66 units to complete. Students must be admitted to both programs in order to pursue the dual degree option.Please Note: Requirements for graduation, course offerings, course availability, track offerings and any other degree requirements are subject to change.GRE General Test: Satisfactory and valid test scores. Valid GRE scores must be dated within five years of the start of the intended application semester.For possible exemption from additional language requirements, applicant must achieve an Internet Based TOEFL score of 90, with no less than 20 on each section or an IELTS score of 6.5, with no less than 6 on each band score.
Ph.D. Industrial and Systems Engineering
College description: It is open to students who have completed a bachelor of science degree in engineering, a physical science, computer science, or applied mathematics.The program is offered jointly by the College of Business and the College of Engineering and Computer Science. It allows students to receive both the MBA and MSE-ISE simultaneously upon completion of the required 57-66 credit hours.Completion of a bachelor of science degree in engineering, a physical science, computer science, or applied mathematics.Tailor the degree to their own interests with an optional MBA concentration in Accounting, Business Analytics, Finance, Human Resource Management, International Business, Information Systems Management, Marketing, or Chain Management. (Students electing the Information Systems concentration in the MSE-ISE may not earn the MBA concentration in Information Systems Management. Students electing the Operations Research and Management Science concentration in the MSE-ISE may not earn the MBA concentration in Chain Management.).Alternatively, applicant may elect courses from the university extensive list of graduate business courses. Students may count up to 3 credits in non-business graduate courses or Business Internship toward the MBA electives with the approval of the Graduate Programs Office.Four courses may be taken from one concentration area or from any combination of the following four areas.IMSE 519 Quantitative Methods in Quality EngineeringComplete no than 4 AIM, MBA Concentration, and MBA Elective courses in any one discipline.Complete graduate business courses in at least 5 different disciplines.No single course may be counted toward than one requirement or concentration in the dual-degree program.Students must have earned a B or better in equivalent courses as a part of a degree program completed within the previous 10 years.Regardless of waiver and exemption credits granted, students must earn at least 57 credits in the dual-degree program.In addition, up to 6 transfer credits for previous equivalent graduate coursework can be applied to the degree if those credits have not been counted toward a degree.See also the MSE-Industrial and Systems Engineering program goals.
Degree requirements for the Ph.D. ISE include a minimum of 18 credit hours of coursework and a minimum of 24 credit hours of Ph.D. dissertation.Completion of the required coursework with the minimum GPA 3.3.Students in Ph.D. programs must register for each fall and winter term until final completion of degree requirements unless they have received an authorized leave of absence or have been approved for extramural study.The Ph.D. degree program will be offered to exceptional students who have completed, with distinction, a master’s degree in engineering or a closely related field.GPA REQUIREMENT: A minimum cumulative GPA of 3.2 or higher on a 4-point scale for the B.S. degree and 3.5 or higher on a 4-point scale for the master’s degree.GRE SCORE: All students are required to submit official Graduate Record Examination scores taken within two years before admission. GRE score guideline for admission is 310ENGLISH LANGUAGE PROFICIENCY: Foreign applicants whose native language is not English or do not have a degree from an English-speaking institution must provide the Test of English as a Foreign Languages or the International English Language Testing System score. A minimum score of 84 on IBT TOEFL or 6.5 on IELTS is required for admission.The application package must also include a curriculum vitae or a resume, an academic statement of purpose indicating the intended field or fields of research, and a personal statement that describes the background and life experiences, including cultural, geographical, financial, educational or other opportunities or challenges that motivate the decision to pursue a Ph.D. degree at the University of Michigan-Dearborn.Completion of a University of Michigan master’s degree that included a cognate component.These courses do not toward the minimum 18 credit hours in residence at UM-Dearborn required for the degree and do not appear on the university transcript.Posting a minimum cumulative GPA of 3.3 out of 4 at the time of applying for the exam.Posting a minimum cumulative GPA of 3.3 out of 4 at the time of applying for the candidacy.Candidates must register for the IMSE 990 Dissertation course each fall and winter until completion of all degree requirements.The purpose of the qualifying examination is to assist both the department and the student in determining whether a student can be expected to perform at a sufficiently high level in advanced coursework and research to complete the requirements for the degree.
Online Master Industrial Engineering
College description: The Master of Science in Industrial Engineering degree program provides a graduate-level introduction to the broad field of industrial engineering. The program consists of graduate-level coursework in operations research, statistics, and applied industrial engineering.Students interested in a follow-on doctoral study should find that the program provides an excellent introduction to graduate study and outstanding preparation for in-depth study.There is flexibility in the curriculum when choosing the 9 credit hours of technical and free electives which allows the students to concentrate their studies on a specific area such as operations research, statistics, management, mechanical engineering, etc. Students in the MSIE program do not complete a research thesis or capstone independent work students with such interests should alternatively consider the university Ph.D. programs or one of the university specialty Master degree programs.
With some exceptions, international applicants must take and submit scores for the Test of English as a Foreign LanguageApplicant must submit standardized test scores, most commonly GRE or GMAT.Describe their specific career goals and objectives, the decision to pursue an advanced degree, and other information that may be useful to the admissions committee.All application materials, including transcripts and recommendations, must be submitted online and in English. Applicant are also required to submit an official Test of English as a Foreign Language score.International and domestic candidates that have relocated to the state of Georgia for purposes of full-time employment, as well as their spouses, may qualify for a waiver of the non-Georgia resident portion of tuition through the Economic Advantage Program.Test of English as a Foreign LanguageTOEFL scores are valid for two years and the minimum required total score on the exam is 100 for the internet-based TOEFL examAll applicants to the program must hold a the students.S. bachelor degree or equivalent to be considered for admission. A three-year degree is not equivalent to the the students.S. bachelor degree.
Mechanical Industrial Engineering
College description: Industrial Engineers use a variety of mathematical and computer methods to study, improve, and optimize processes in a wide range of manufacturing and service settings.Students enrolled in the MS in Industrial Engineering have the opportunity to also pursue one of the many engineering graduate certificate options in addition to or in combination with this program. The MS in Industrial Engineering can be combined with a Gordon Engineering Leadership certificate.Review the specific Degree Requirements to see courses needed to complete their degree
The MIE Department is seeking the highest quality students entering either after earning a suitable bachelor’s degree or after earning a master’s degree.It is strongly recommended that applicants interested in funding within the department via fellowships, research assistantships, and teaching assistantships take the Graduate Record Examination
MS MEng in Industrial and Management Engineering
College description: The Industrial and Systems Engineering Department at Rensselaer began in 1987 with the name Decision Sciences and Engineering Systems. The integration of disciplinary perspectives yields a well-rounded professional with graduates placed in leading positions in their field.ISE offers the Master of Science and Master of Engineering degrees in Industrial and Management Engineering. Both degrees require a minimum of 30 credit hours. The Master of Science degree requires a thesis. The Master of Engineering degree is a non-thesis option. All applicants to the IME Master’s programs must take the Graduate Record ExamApplicants with strong quantitative foundation bachelor degrees are considered favorably for admission. Applicants are better prepared for graduate study if courses in the bachelors include courses in probability, statistics, linear algebra, and mathematical optimization. Applicants who have also completed courses in operations management find that topics in graduate courses are grasped quicker.The master’s degree in IME can be completed in one academic year spanning 10 months starting in late August with a finish by graduation in May of the following year. For students who wish to complete a thesis or project as part of the master’s the completion time is a usually 12 months which includes study in the summer but often takes 3 academic year semesters at Rensselaer in Troy, NY.The master’s degree has approximately 10 graduates every year for the one year program of 30 credit hours typically completed through courses and projects.
ISE offers the Master of Science and Master of Engineering degrees in Industrial and Management Engineering. Both degrees require a minimum of 30 credit hours. The Master of Science degree requires a thesis. The Master of Engineering degree is a non-thesis option. All applicants to the IME Master’s programs must take the Graduate Record Exam Both masters are not restricted to applicants with an degree in Industrial Engineering. Applicants with a strong quantitative degree or with a quantitative master’s degree desiring a change in career path are encouraged to .Applicants with strong quantitative foundation bachelor degrees are considered favorably for admission.The master’s degree has approximately 10 graduates every year for the one year program of 30 credit hours typically completed through courses and projects. The IME master’s degree does not have university based student financial aid in the form of teaching or research assistantships.The GPA is confirmed through review of transcript Application processing is speeded up if the transcript shows grade equivalence to the letter grades of A though F or on a document from the university. For international applicants where the native language is not English and who have not completed an degree in an US college or university, the TOEFL is required. The desired minimum TOEFL is 90.The Graduate Record Exam is required of all applicants.Over 110 application for master’s degree graduate study in the Industrial and Systems Engineering Department are received annually.To complete the Master’s degree requirements, students must include a minimum of 24 credits from the list of approved Industrial and Management Engineering courses for the master’s program.Both course topics are part of an degree in industrial and management engineering and are the foundation starting point for most graduate courses in the IME curriculum. This often requires three semesters to complete the degree from the nominal 2 semesters of the degree.
Industrial and Enterprise Systems Engineering
College description: Students in the MS Systems and Entrepreneurial Engineering degree program may choose to pursue the thesis or non-thesis option in the program. As a general guideline, students who do not wish to pursue a PhD program should enroll in the non-thesis option students who plan to pursue a PhD must complete the thesis option.SE 599 Thesis Research —4 hours.A maximum of 4 CR-graded credit hours in non-SE courses may be applied toward the degree.
ISE does not have a minimum GRE score for admission, but GRE scores must be submitted.Students may be admitted on limited status if their TOEFL score is 79-102, but the applicant must be outstanding in other areas.ISE prefers that the recommender submit their recommendation .IMPORTANT: Please note that this exemption is for admission purposes only.This is listed in the admission letter.
Industrial Engineering, M.S. University of Wisconsin-Madison
College description: An introduction to industrial engineering subject matter areas, problem types, and design analysis approaches, techniques, and methodologies.Financial accounting principles and cost systems, interpretation and use of accounting reports and supplemental information for engineering economic analyses, consideration of cost-volume-profit analyses, use of discounted cash flow techniques, flexible budgeting, transfer pricing, and capital budgeting.This course provides students with hands on experience applying concepts discussed in the course Introduction to Human Factors Engineering Non ISyE students may be allowed to enroll based on space availability and consent of the instructor, on a first-come basis.This course introduces industrial engineering students to the tools needed for advanced design courses through experiential learning and hands-on opportunities to conduct experiments, take relevant measurements, analyze real-world data, design systems, and to make and test prototypes of their designs.This course will provide students with understanding of the fundamentals of using industrial data analytics techniques to transform from data-rich into decision-smart. It focuses on training students with the ability of formulating and solving real industrial problems with the appropriate modeling strategies and analytics principles for better decision making.Introduction to the application of industrial engineering methods to the analysis and improvement of health care delivery.Requisites: or graduate professional standing or member of the Pre-Masters Mathematics Program.Complete design of an industrial engineering system in a real world setting, e.g., manufacturing, hospital, communications, food processing, distribution, transportation, etc.Course Designation: Grad 50% Counts toward 50% graduate coursework requirement.This course addresses the role of the industrial engineer as a manager of continuous improvement in design and production processes.
The flexible graduate curricula enables students to tailor their degree program to suit their particular needs and career objectives.Letters of recommendation must be submitted electronically.GRE Exam Information: The IE graduate program does require the GRE exam be taken by prospective students as part of the application but note there are no specific scoring guidelines for the exam as the GRE is only one part of the consideration for admission into the program.Receive a 26 or higher on the speaking portion of the TOEFL testGrades of C and D received by a candidate in any graduate course will not be counted as credit toward the degree. These grades will be counted in the graduate GPA.These tracks are internal to the program and represent different pathways a student can follow to earn this degree.Not allowed for graduate residence credit requirement but allowed for graduate degree credit requirement and graduate coursework requirement. Coursework earned five or years prior to admission to a master’s degree is not allowed to satisfy requirements.Master’s degree students who have been absent for five or consecutive years lose all credits that they have earned before their absence.
College description: Statistical design and analysis of experiments in engineering experimental models and experimental designs using the analysis of variance.Study of stochastic processes and their applications to engineering and chain and information systems.Theory and application of dynamic programming Markov decision processes with emphasis on applications in engineering systems, chain and information systems.Study of concepts and methods in analysis of systems involving multiple objectives with applications to engineering, economic, and environmental systems.Mathematical definition of concepts in reliability engineering methods of system reliability calculation reliability modeling, estimation, and acceptance testing procedures.The objective of the course is to examine state-of-the-art practices, models, solution techniques, and opportunities for graduate research.It is designed for students interested in product realization, engineering design, and manufacturing to gain an understanding of mass customization and methods for designing families of products based on modular and scalable product platforms.Information processing and decision making models of the human in the modern workplace, emphasizing visual inspection and other industrial applications.Materials processing and manufacturing methods for engineering materials manufacturing process modeling and control manufacturability of engineering materials. They will be able to select appropriate material and manufacturing processes for engineering components and identify critical material and manufacturability issues that limit manufacturing success. Students will be able to these principles to develop an understanding of manufacturability constraints for newly developed engineering materials and processing methods.
Scores from the Graduate Record Examination are required for admission.English proficiency test scores may be required for international applicants.The students seeking the Master of Science degree in Industrial Engineering with non-thesis track are expected to start their degree in the Fall semester of every year and complete their degree including all the required course work and three credits of research resulting in a paper and graduate by the end of summer following the second semester.The degree requirements consist of 45 credits of course work and four IE 590 credits. A Ph.D. dual-title degree program in Industrial Engineering and Operations Research is also available.Doctoral students must be admitted into the dual-title degree program in Operations Research prior to taking the qualifying examination in their primary graduate program.To qualify for the dual-title degree, students must satisfy the degree requirements for the degree they are enrolled in Industrial Engineering.Dual-title graduate degree students may require an additional semester to fulfill requirements for both areas of study and, therefore, the qualifying examination may be delayed one semester beyond the normal period allowable.Upon completion of the doctoral dissertation, the candidate must pass a final oral examination to earn the Ph.D. degree.Consideration for these fellowships shall be given to students exhibiting academic excellence who have been admitted to Penn State as candidates for a graduate degree in the Industrial and Manufacturing Engineering, College of Engineering.Consideration for this fellowship shall be given to students exhibiting academic excellence who have been admitted to Penn State as candidates for a graduate degree in the Industrial and Manufacturing Engineering, College of Engineering.
Industrial Systems Engineering
College description: The Master of Science in Industrial Engineering is intended for students who are interested in pursuing an advanced, research-oriented degree for a career in industry, government, or the engineering sciences or in preparation for a Ph.D. The Master of Science program is intended for full-time, on-campus students.Graduate students discuss their research and why they chose the UW.
Applicant can department with Physics 123 in progress at the time of application and still be considered for admission.Applicant need to take the GRE for application to the Master of Science and Ph.D. programs. Applicant do not need to take the GRE for application to the Master of Engineering program.Unless applicant have completed a 4-year bachelor degree program in the the students.S., or their higher education was conducted entirely in English, applicant will need to take the TOEFL exam. A master degree from the the students.S. will not exempt applicant from this requirement.The minimum required scores on the TOEFL is 92.
SSOE Industrial Engineering Admissions
College description: Office of the the students.S. Steel Dean of Engineering.Industrial engineering is choices it is the engineering discipline that offers the most wide-ranging array of opportunities in terms of employment, and it is distinguished by its flexibility. While other engineering disciplines tend to skills to very specific areas, Industrial Engineers may be found working everywhere: from traditional manufacturing companies to airlines, from distribution companies to financial institutions, from major medical establishments to consulting companies, from high-tech corporations to companies in the food industry.Future Kings Mentoring exists to be that greater place in the Pittsburgh community to make the university experience the standard, adds Williams, who is studying industrial engineering.The Design Expo highlights how creativity and innovation in engineering can impact the lives of others. The university winners have truly demonstrated their engineering abilities.The goal of the Pitt STRIVE Program is to improve transitions of underrepresented minority students into doctoral engineering programs at the University. Wosu acknowledged the support and commitment from the the students.S. Steel Dean of Engineering James R.Leu’s team has helped to greatly accelerate the metal microgrid process technology for OLED lighting from concept to demonstration, and now the University of Pittsburgh-Pittsburgh Campus is working with the university industrial partners towards commercialization.
In general, transfer students are required to have a minimum of a 3.0 GPA.LETTERS OF REFERENCE: Applicants must have at least two reference letters submitted electronically as part of the on-line admissions application process.Official GRE test scores must be sent directly from the Educational Testing ServiceTOEFL or IELTS scores : The Test of English as a Foreign Language is required for all applicants whose native language is not English,except for those who have recently received a degree from a regionally accredited institution in the United States or any other English speaking country. It is the policy of the University of Pittsburgh to admit only those students with a TOEFL score of at least 550 , 213 or 80
University of IowaRanked 71 in Best National University.
Industrial and Systems Engineering
College description: Both options require at least 21 graduate-level semester credits in Industrial and Systems Engineering, including research credits. All graduate students must register for IE:5000, Industrial and Systems Engineering Graduate Seminar, each semester in which they are enrolled in the university.All Master degree candidates must take at least nine semester credits at the 6000 level from the Industrial and Systems Engineering curriculum. If a student degree objectives change, a new plan of study must be drafted and agreed upon by the student and advisor. M.S. thesis applicants who wish to pursue a PhD degree at The University of Iowa may wish to select two 5000-level courses in each of the focus areas to complete their PhD breadth requirement before entering the PhD program.In addition to the Industrial and Systems Engineering Graduate Program supported by the standard Industrial and Systems Engineering Curriculum, a Graduate Program in Wind Power Management is offered based on the Emerging Area Curriculum.Combined B.S. M.S. Degree Program: Thesis and Non-Thesis Program.The ISE Department Chair or Graduate Program Coordinator will assign an advisor during the first regular semester of the student residence.Plan of StudyThe student and the advisor will prepare a plan of study during the semester of assignment of a regular advisor and will submit that plan to the Director of Graduate Study for approval.
TOEFL if English is not their first language: 600 PBT
Mechanical and Industrial Engineering
College description: PhD student Sacchita Tiwari and Master student Qian Feng are operating a ultrafast stroboscopic microscope to investigate the dynamic mechanical behavior of soft tissues.The MIE Innovation Makerspace exists to encourage learning and build an appreciation for engineering principles through both academic and personal projects.Four NSF CAREER Awards Tie Record for Most in One Year at College of Engineering.Four College of Engineering researchers have tied the college record for obtaining the most CAREER Awards from the National Science Foundation in one year.Dean’s Fellows Program Rewards the Best of the Best Entering Doctoral Students in the College of Engineering.
Waivers of the fee are available only to those applicants who receive a waiver of the GRE test through their financial aid office.