For admissions to masters degree program in Materials Sciences at Best Universities, GRE, GPA requirements are
Masters programs in Materials Sciences which do not require GRE
Admissions Supporting Materials
Failure to submit complete, accurate, and authentic application documents consistent with these instructions may result in denial or revocation of admission, cancellation of academic credit, suspension, expulsion, or eventual revocation of degree.Letters of recommendation must be submitted through the GSAS application system. All letters must be uploaded by the recommender directly to the application system.Applicant may application even if their letters of recommendation have not yet been submitted. Once the letters are received, the university will append them to their application.Letters of recommendation from the earlier application can then be included in the new application.GRE Subject Test scores, if required by the department or program.The TOEFL or IELTS, in fulfillment of the English Proficiency Requirement.GRE scores are valid for five years from the date taken.TOEFL scores are valid for two years from the date taken.Applicants to the Master of Arts degree program in Mathematics of Finance only may substitute the GMAT for the GRE General Test. Applicants to any other program may not substitute the GMAT in place of the GRE General Test.
Materials Science and Engineering
Graduate programs lead to the degrees of Master of Science, Engineer, and Doctor of Philosophy.All courses taken for the major must be taken for a letter grade if that option is offered by the instructor. Minimum Combined GPA for all courses in Engineering Topics is 2.0.Have an overall GPA of 3.5 or higher prior to application.Overall GPA of 3.5 or higher at graduation.The University’s basic requirements for the M.S. degree are discussed in the Graduate Degrees section of this bulletin.The Materials Science and Engineering requires a minimum of 45 units for a master’s degree to be taken in residence at Stanford. Final revisions to the master’s program proposal must be submitted no later than one academic quarter prior to the quarter of expected degree conferral. Stanford Materials Science s who are pursuing or who plan to pursue a Coterminal M.S. degree may have flexibility in their programs and should consult with their academic advisers regarding appropriate core course and elective choices. The GRE is required for admission to the M.S. program.A minimum grade point average of 2.75 for degree course work.Out of the 45 units M.S. degree requirements, 6-15 units may be taken in Materials Science Master research by enrolling in MATSCI 200. Students using 15 units of research toward the degree must participate in a complex and demanding research project than those using lesser units.Admission to the Ph.D. program is required for a student to be eligible to work towards the Ph.D. degree.Students who wish to submit a petition to the Ph.D. degree, should plan to complete at least six of the MATSCI 200 series core courses during their first year of admission. A grade point average of 3.5 or better in the core courses is requirement.Students must adhere to requirements for the terminal M.S. degree, and plan to confer the M.S. degree in the event that the Ph.D. petition to transfer is not approved.Stanford s who wish to continue their studies for the Master of Science degree in Materials Science and Engineering through the Coterminal program may for admission after they have earned 120 units toward graduation as shown on the unofficial transcript. Scores from the Graduate Record Examination General Test must be reported before action can be taken on an application.Coterminal master’s degree candidates are expected to complete all master’s degree requirements as described in this bulletin. University requirements for the coterminal master’s degree are described in the Coterminal Master’s Program section. University requirements for the master’s degree are described in the Graduate Degrees section of this bulletin.After accepting admission to this coterminal master’s degree program, students may request transfer of courses from the to the graduate career to satisfy requirements for the master’s degree.The University’s basic requirements for the degree of Engineer are outlined in the Graduate Degrees section of this bulletin.Final changes in the Application for Candidacy form must be submitted no later than one academic quarter prior to degree conferral.A grade point average of 3.0 must be maintained for all degree course work taken at Stanford.The University’s basic requirements for the Ph.D. degree are outlined in the Graduate Degrees section of this bulletin. The GRE is required for admission to the Ph.D. program.The Ph.D. degree is awarded after the completion of a minimum of 135 units of graduate work as well as satisfactory completion of any additional University requirements.Ph.D. students are required to for and have conferred a MATSCI M.S. degree normally by the end of their third year of studies.A grade point average of 3.5 in core courses MATSCI 201-210 is required for admission to the Ph.D. qualifying examination. Students who have passed the Ph.D. qualifying examination are required to complete the Application for Candidacy to the Ph.D.degree by June of the second year after passing the qualifying examination.Maintain a cumulative GPA of 3.0 in all courses taken at Stanford.The University’s basic requirements for the Ph.D. minor are outlined in the Graduate Degrees section of this bulletin. Courses must be taken for a letter grade. The proposed list of courses must be approved by department advanced degree committee. Individual programs must be submitted to the student services manager at least one quarter prior to the quarter of the degree conferral. None of the units taken for the Ph.D. minor may overlap with any M.S. degree units.Graduate students are active contributors to the advising relationship, proactively seeking academic and professional guidance and taking responsibility for informing themselves of policies and degree requirements for their graduate program.Finally, the department believes that graduate students are active contributors to the advising relationship, proactively seeking academic and professional guidance and taking responsibility for informing themselves of policies and degree requirements for their graduate program. As such, it expects students to read the monthly MSE Updates newsletter, which provides deadlines, web links, and other valuable information on graduate degree progress.The department doctoral students are active contributors to the advising relationship, proactively seeking academic and professional guidance and taking responsibility for informing themselves of policies and degree requirements for their graduate program. As such the department expects students to read the monthly MSE Updates newsletter which provides deadlines, web links, and other valuable information on graduate degree progress.By letting in heat during the summer and releasing it in winter, windows can place huge demands on air conditioning and heating systems, thereby increasing energy consumption and raising greenhouse gas levels in the atmosphere.
Materials Science and Engineering
Test of English as a Foreign Language
Materials Science and Engineering
The Materials Science and Engineering offers two options for students pursuing a Master of Science in Engineering: an MSE degree with essay and an MSE degree without essay.Requirements for the MSE Degree with Essay UPDATED 05 18.With the approval of the Master’s Degree Committee, the student may transfer up to two graduate courses from another institution. Students desiring such credit must make the request in writing to the Master’s Degree Committee by the end of the first semester after matriculation. Please note that transfer coursework grades do not count towards calculation of the GPA.A master’s essay or journal publication is required. Research for the master’s essay or journal publication may be conducted with a corporate sponsor through the INBT Co-Op program.The student’s transcript will reflect a Master of Science in Engineering with Essay.Requirements for the MSE Degree without Essay UPDATED 05 18.Requirements for the MSE Degree with EssayRequirements for the MSE Degree without Essay
Admissions Graduate Study Materials Science Engineering
The Northwestern University consider prior academic performance, research and other professional experience, GRE scores, and overall potential to successfully pursue graduate study in the university department. Experience and potential are evaluated largely through the letters of recommendation and the statement of purpose. Foreign students from non-English speaking countries must also take the Test of English as a Foreign Language exam or the International English Language Testing System exam.The MSE department does not require a writing sample separate from the Statement of Purpose. Submission of a resume or CV is optional.The MS program refers to students who are interested only in that degree. An MS degree is not required for admission to the PhD program in materials science and engineering.All international students whose degrees are not from institutions where the language of instruction is English must take the TOEFL or IELTS exam.Applicants who will have earned a Bachelor or Master degree from a university where the language of instruction is English by the quarter of matriculation will receive a TOEFL waiver.If applicant are taking the TOEFL or GRE be sure to include this number on their test form.This includes having an official TOEFL score.TOEFL must be taken no than two years before the intended quarter of entry.The only minimum the university set is TOEFL, on which an international applicant must score 550 or higher on the paper-based test, 213 or higher on the computer-based test, 90 or higher on the internet-based test. There is no minimum requirement for GRE scores.
The Institute of Materials Science Engineering
A Bachelor or Master degree from an accredited institution is required for consideration for admission into the PhD degree program.GRE Scores: Please have their GRE and or TOEFL scores sent directly to the University. The General Test of the Graduate Record Examination is required for admission to the IMSE.TOEFL Scores: Proficiency in English is required of all applicants. Applicants, whose native language is not English, must demonstrate English proficiency and are required to provide an official score report from the Test of English as a Foreign LanguageGPA greater than 3.2 or 80
Cornell UniversityRanked 15 in Best National University.
Graduate School
Applicants should have an degree in engineering or physical science. United States and Canadian applicants are strongly advised to submit GRE general test scores all other applicants must submit those scores.
Rice UniversityRanked 19 in Best National University.
Materials Science and NanoEngineering
The status of their application and letters of recommendation can be viewed in their application account on the applyweb.Applicant may submit other application materials in advance, but their application will be on hold until their GRE scores are received.The university require that the GRE test have been taken within the five years.
Graduate
The MS and PhD degrees involve extensive research, leading to a thesis or dissertation, respectively. The MMSE degree does not include a thesis and is often achieved by off-grounds graduate students enrolled in the SEAS distance-learning program Virginia Engineering . The program of study for each of these degrees has been developed consistent with the principles of academic excellence as a foundation for cutting-edge research and cross-disciplinary learning. The starting point for each of the three degree programs is the MSE core curriculum.The MSE Graduate Student Coordinator will distribute this policy statement to all entering graduate students and will assist each student in understanding the departmental requirements.MSE 6050 and MSE 6060 may be taken for elective credit only by those students who do not have an degree in MSE, or upon petition to the MSE Graduate Director by the graduate student advisor.Students who have earned graduate course credits at UVa or at another institution may transfer up to six credits into the MSE-MS program of study provided those courses were not used to earn another degree. Transferred courses may have been taken in MSE or in another field of engineering or science, but may not have been applied to achieve any other earned degree.The four core courses, written thesis, and public defense of the thesis are departmental requirements for the MS degree and cannot be waived.MSE 6050 and MSE 6060 may taken for elective credit only by those students who do not have an degree in MSE or upon petition to the MSE Graduate Director by the graduate student advisor.Students entering the PhD program without an MS degree may transfer up to 12 credits of graduate course work to be applied to their plan of study, provided those courses were not used to earn another degree, subject to approval by the MSE Graduate Director and the Associate Dean of Graduate Studies.
Materials Science Graduate Program
GRE reporting is optional for the Master’s applications. If a GRE score is self-reported, an official score report from ETS is required for score verification.TOEFL or IELTS scores for non-native English speakers.Any documents or letters submitted in support of their application should be in English or should be accompanied by an English translation.
Materials Science and Engineering
TOEFL IELTS PTEIf an application has less than three letters the application will not be reviewed.
Admissions Materials Science and Engineering
The application process is the same for all three degree tracks, as is the general deadline of January 15th. In order to ensure that their application is reviewed, please by this deadline and submit all additional materials as soon as possible after applicant application, but no later than February 1st.
Deadlines Required Materials
Certificate applicants only need to provide items 1, 2, 3, 4, 8 and one letter of recommendation.Three Letters of Recommendation for all degree programs submitted via ApplyYourself.GRE strongly encouraged for applicants with less than 3 years of professional experience.90 TOEFL iBT : All programs in the English and the Sociology and Anthropology.79-80 TOEFL iBT : All programs not previously mentioned.
Materials Science and Engineering MS
UC has a minimum GPA of 3.0 4.0 for consideration for graduate admissions, however the Ph.D. program generally requires considerably higher.Is prioritized for Ph.D. students during the normative time to degree. International M.S. and Ph.D. applicants must have a minimum TOEFL-iBT score of 100, Ph.D. applicants must also have a minimum score on the Speaking section on the TOEFL-ibT of 26 or a score of 8 in the speaking component of the IELTS OR a score of 50 on the SPEAK exam.
Materials Science and Engineering
The university strongly recommend that applicant and their recommenders application and letters of support well in advance of the deadline to avoid any technical difficulties incurred due to high traffic.The University’s Graduate College enforces a minimum GPA of 3.0. The average GPA of incoming students to Materials Science and Engineering is 3.65.GRE scores are required for applicants to the graduate program in Materials Science.The Department requires a minimum TOEFL score of 104 and an IELTS score of 7 for full status admission.Instructions for this request may be found in the decision letter for the Ph.D. program application.
PhD and Master of Science in Materials Science Engineering
The University of Wisconsin offers graduate degrees in materials science and engineering, with a primary focus on Ph.D. students, who perform cutting-edge independent research with the support of their advisors and thesis committee members. A Master’s degree is also offered during progress towards the PhD for students enrolled in the PhD program. Direct admission to the terminal Master’s degree program is unusual.A minimum GPA of 3.0 4.0 is required. Mean GRE scores in the most recent admission cycle were quantitative: 166, verbal: 163, and analytical writing: 3.5.Foreign students must submit satisfactory results on the TOEFL or another acceptable English Language Test.An RA permits the most rapid progress toward a degree.GRE scores for the General Test are required for fellowship applications.This document contains the requirements for Materials Science and Engineering graduate degrees: MSE Graduate Curriculum.
Materials Science and Engineering
The Intercollege Graduate Degree Program in Materials Science and Engineering offers comprehensive graduate education in the fundamentals of materials scienceScores for the Graduate Record Examinations are required for admission. Applicants with verbal and quantitative GRE scores 303 or higher will be considered.English proficiency test scores may be required for international applicants.As a culminating experience for the M.S. degree, students may choose to complete either a thesis or a scholarly paper.A master degree is not a prerequisite for the doctorate.Upon approval by the Ph.D. committee and the graduate program coordinator, some or all of the course requirements may be waived for students holding an M.S. degree from another institution.Doctoral students must be admitted into the dual-title degree program in Biogeochemistry prior to taking the qualifying examination in their primary graduate program.To qualify for the dual-title degree, students must satisfy the degree requirements for the degree they are enrolled in Materials Science and Engineering.Dual-title graduate degree students may require an additional semester to fulfill requirements for both areas of study and, therefore, the qualifying examination may be delayed one semester beyond the normal period allowable.Upon completion of the doctoral dissertation, the candidate must pass a final oral examination to earn the Ph.D. degree.
UW Materials Science Engineering
Beyond this, the university department does not maintain a fixed minimum for either GPA or exam scores.The department accepts new degree students for autumn quarter only.Transcripts the university only require transcripts from institutions where applicant received a degree.It should be approximately one page in length and offer a clear of their reasons for pursuing this graduate degree, their previous preparation, their research experience and interests, and their plans for seeing this degree through to completion.Three letters of recommendation Letters from academic references are preferred, but relevant professional references are also acceptable. Strong letters will be substantive, specific, and will address an applicant technical experience and research ability, the applicant likelihood of success in graduate-level studies, and the relevance appropriateness of the MSE program for the applicant future goals.If applicant hold an appropriate degree from an accredited university, applicant are eligible to PhD program.
Admissions
The university will accept TOEFL IELTS GRE scores until January 15.There are no specific requirements for admission to the MS E program but applicants would benefit greatly from having a B.S. degree in physical sciences or engineering disciplines.A score of 550 , 213 , or 79 on the Test of English as a Foreign LanguageThe The University of Texas at Austin require GRE and TOEFL scores from all applicants.For international students, the TOEFL score may only be waived if applicant hold a 4 year bachelors degree from a US institution. The university will not waive the requirement for master degrees, it must be a 4 year bachelors program.Applicants from the following countries are exempt from submitting a TOEFL or IELTS score: American Samoa, Australia, Bahamas, Barbados, Belize, Canada , Dominica, Grenada, Grand Cayman, Guyana, Ireland, Jamaica, Liberia, New Zealand, Trinidad Tobago, United Kingdom, US Pacific Trust.The university require three letters of recommendation for their application.However, their test scores and recommendation letters will carry over from the previous application.Use the GPA Calculator on the Registrar’s Page.All GPA information should be provided on a 4-point scale.Keep in mind that the Graduate and International Admissions Center will calculate their official GPA for official purposes.Applicant can also use this site to remind their references of missing letters of reference.
Materials Science and Engineering
Graduate Non-Degree For students who hold a baccalaureate degree wishing to take graduate-level course work, but who do not intend to complete a Master degree.Acceptance into GND status does not imply future admission to the degree-granting program.A minimum TOEFL score of 79 is required.Minimum GRE scores of 150 on the Verbal Reasoning, 150 on the Quantitative Reasoning, and 3.5 on the Analytical Writing are required.The student is to take the GRE and have the scores sent to OSU.
Materials Science and Engineering Master’s and Master’s 4+1 Programs
The Tulane University Master of Science Degree in Materials Science and Engineering is an interdisciplinary degree that will focus on the fundamentals of material structure, material properties, material processing, and material modeling that are required to solve complex technological problems found in basic and applied sciences. The MSE degree program will provide preparation for professional practice in modern materials science for those engineers who wish to continue their education.Applicants must have completed at least 24 credit hours in science and engineeringApplicants must submit a transcript, GRE General Test scores, a personal statement, two letters of recommendation, and TOEFL or IELTS scoresA GPA of 3.0 is required for the degree to be conferred. Courses receiving less than B will contribute no credit toward the Master’s degree requirements.GRE and TOEFL scores are not required for Tulane 4 1 students.A GPA of 3.0 is required at graduation. Courses receiving less than B will contribute no credit toward the Master’s 4 1 degree requirements.
Materials Science and Engineering
Students who have received a degree from a regionally accredited institution in the the students.S. or a nationally recognized university in one of the countries on the subsequent list do not need to submit TOEFL, IELTS or PTE scores. This exemption also applies to students who are currently studying for a degree at an institution in the the students.S. or one of the countries on the list, but will receive their degree before enrolling at the University of Maryland.A bachelor or master degree from an accredited institution is required for admission into the Ph.D. program.
Materials Science and Engineering at Virginia Tech
In general, the MSE Department normally expects applicants to have a minimum grade point average of 3.0 or better for either the B.S. degree program or the last 60 hours of course work. Students applying to MSE must take the GRE. International applicants must also take the TOEFL unless they have completed a degree at an English speaking university. The university expect a minimum TOEFL score of 90 or IELTS score of 6.5 for admission. Additionally, TOEFL scores of 20 or greater are required in each subsectionGRE: 150 Verbal, 155 Quantitative, 4.0 Analytical Writing.TOEFL : 90
Materials Science and Engineering
A minimum of three letters of strong reference from former teachers and or supervisors.A required minimum GRE score of 155 for the quantitative section with a combined total score of 300 for the verbal and quantitative sections. Since the GRE test scores are good for five years, those applicants using the old testing scores, the required minimum score is 700 for the quantitative section with a combined total score of 1200 for the verbal and quantitative sections.The Test of English as a Foreign Language for all students whose first language is not English and who have not received a degree from a college or university in which English is the primary language of instruction. The University required minimum TOEFL score is 79 or 550 for paper based.An alternative to the TOEFL is IELTS
Materials Science, Ph.D.
A TOEFL score greater than 550 , for international students.The graduate committee is charged with supervision and approval of the student research and course of study toward the completion of all requirements leading to the degree.See the Degree Requirements section of this catalog for details on plan of study, admission to candidacy, and all other degree requirements. After being admitted to candidacy, the student must complete the remaining requirements for the degree, the main requirement being the doctoral research and dissertation. Credits in materials-related courses earned toward a master degree at The University of Alabama may be applied to the doctoral degree.All requirements for the doctoral degree must be completed within a period of seven years of the date of admission.For additional residence, time limits and degree requirements information, see the Degree Requirements section of this catalog.The Doctor of Philosophy degree is regarded as the researcher degree.A defined field of specialization is required of all candidates for the Doctor of Philosophy degree.There is no universitywide foreign language research skill requirement for doctoral students each college or department offering the PhD degree may set its own requirements. This policy reaffirms the importance of research skills and foreign languages in the highest academic degree granted by American universities, but it also recognizes that the departments offering the degrees are in the best position to determine the number and nature of such requirements in the interests of their students.A department may terminate a student doctoral admission if there is documented unsatisfactory academic or other progress toward completion of the degree.It may be necessary for students in this situation to secure an evaluation of their credentials from World Education Services Inc.All doctoral programs: Up to one-half of the required coursework for a doctoral degree may be transferred from another institution if the credit was in-field and was earned during the six-year period preceding the semester of admission to the UA doctoral program. The student must have attained an overall graduate GPA of B or better on all graduate work attempted.PhD Programs Only: A student holding an earned, in-field master degree over six years old and working in the field or a related field since earning the degree may request approval for up to 24 hours of credit to be applied to the PhD. To do this, the student must have earned at least a B overall graduate GPA from the awarding institution. If approved for transfer, these hours would count toward the minimum 48 coursework hours required for the PhD degree.All requirements for the doctoral degree must be completed within nine years following admission to the doctoral program, with the following specific exception approved by the Graduate Council: Modern Languages and ClassicsOnly those students graduating within the time limit for their doctoral program may previously approved graduate credit to the doctoral degree.In this case, both grades are used in calculation of the GPA.Once a student has met the requirements for admission to candidacy, received approval for the dissertation research proposal, or initiated enrollment in 699 , the student must pursue completion of the dissertation without interruption by enrolling each fall and spring semester of the academic year for at least 3 hours of dissertation research.This examination will focus primarily on the candidate research work, as embodied in the dissertation, and the field in which the dissertation lies, but it may encompass the complete program for the degree.Each candidate for a doctoral degree must submit an Application for Degree via myBama not later than the last day to register or add a course of the semester or the first term of the summer session in which requirements for the degree are to be completed.
Materials Science
The minimum GPA for admission consideration for graduate study at the University of Denver is a cumulative 2.5 on a 4.0 scale or a 2.5 on a 4.0 scale for the last 60 semester credits or 90 quarter credits for the baccalaureate degree. An earned master’s degree or higher from a regionally accredited institution supersedes the minimum standards for the baccalaureate. The minimum GPA is a cumulative 3.0 on a 4.0 scale for all graduate coursework undertaken.Program GPA requirement: The minimum GPA for admission consideration for this program is a cumulative 2.5 on a 4.0 scale.A bachelor’s degree in Materials Science, Engineering, Physics, Metallurgy, or Chemistry is normally required for admission to the MS Materials Science program.Official scores from the Test of English as a Foreign Language , or International English Language Testing System or Cambridge English: Advanced are required of all graduate applicants, regardless of citizenship status, whose native language is not English or who have been educated in countries where English is not the native language.The Graduate Record Examination is required.Two letters of recommendation are required. Letters should be submitted by recommenders through the application.
