Masters programs in Chemical Engineering which do not require GRE - Updated 2020
Admission to an advanced degree program for an active Stanford graduate student is by approval of a Graduate Authorization Petition.
The University’s requirements, including residency requirements, for the M.S., Engineer, and Ph.D. degrees are summarized in the "Graduate Degrees" section of this bulletin.
The depth sequence of courses required for the major in chemical engineering provides training in applied chemical kinetics, biochemical engineering, electronic materials, engineering thermodynamics, plant design, polymers, process analysis and control, separation processes, and transport phenomena.
Minimum Combined GPA for all courses in Engineering Fundamentals and Depth is 2.0.
The Department of Chemical Engineering offers a program leading to the degree of Bachelor of Science in Chemical Engineering with Honors.
Declared Chemical Engineering majors with a cumulative grade point average of 3.5 or higher are encouraged to apply.
Maintain an overall grade point average of at least 3.5 as calculated on the unofficial transcript.
A range of M.S. programs comprising appropriate course work is available to accommodate students wishing to obtain further academic preparation before pursuing a chemical engineering career or a degree program. The degree requirements are lecture course based; there are no research or thesis requirements.
For conferral of a master's degree in Chemical Engineering, the following departmental requirements must be met.
Unit and Course Requirements for the Master's Degree
Credit toward the required minimum of 45 completed units for the M.S. degree is not given for Chemical Engineering special topics courses numbered in the 500 series.
Complete a Program Proposal for a Master’s Degree form, that is approved by the M.S. adviser.
Any course used to satisfy the 45-unit minimum for the Master of Science degree must be taken for a letter grade, if offered. An overall grade point average of 3.0 must be maintained for these courses.
Once arrangements are mutually agreed upon, including the number of units, students enroll in the appropriate section of CHEMENG 600 Graduate Research in Chemical Engineering. Research units may not be substituted for any of the required four 300-level core lecture courses.
The GRE is not required for students applying for the Chemical Engineering coterminal master's degree.
Coterminal master’s degree candidates are expected to complete all master’s degree requirements as described in this bulletin. University requirements for the coterminal master’s degree are described in the “Coterminal Master’s Program” section. University requirements for the master’s degree are described in the "Graduate Degrees" section of this bulletin.
Course transfers are not possible after the bachelor’s degree has been conferred.
The University also requires that the Master’s Degree Program Proposal be completed by the student and approved by the department by the end of the student’s first graduate quarter.
The degree of Engineer is awarded after the completion of a minimum of 90 units of graduate work beyond the B.S. degree and the satisfactory completion of all University requirements plus the following departmental requirements. This degree is not a prerequisite for the Ph.D. program.
A minimum of 90 completed units is required, including a component of a minimum of 45 units in science and engineering courses, consisting of 42 lecture units and 3 CHEMENG 699 Colloquium units.
In fulfilling the required 45-unit requirement for lecture course units, the course work may not include chemical engineering's 500 level seminar courses or similar 1-2 unit courses in other departments.
Students seeking the Engineer degree may petition to add a M.S. program and apply for the M.S. degree once the requirements for that degree have been fulfilled. See General Requirements in the “Graduate Degrees” section of this bulletin and Chemical Engineering’s “Master's” section.
Any course intended to satisfy the Engineer degree requirements must be taken for a letter grade, if offered. An overall grade point average of 3.0 must be maintained.
Qualification for the Ph.D. Program by Students Ready to Receive the Degree of Engineer
After completing the requirements for the Engineer degree, a student may petition to be examined on the research work completed for that degree, for the purpose of qualifying for admission to Ph.D. candidacy.
The University’s general requirements for the Ph.D. are specified in the "Graduate Degrees" section of this bulletin.
The Ph.D. degree is awarded after the completion of a minimum of 135 units of graduate work as well as satisfactory completion of any additional University requirements and the following departmental requirements. Completion of a M.S. degree is not a prerequisite for beginning, pursuing, or completing doctoral work.
A minimum of 135 completed units is required, including a component of a minimum of 45 units in science and engineering courses, consisting of 42 lecture units and 3 units of CHEMENG 699 Colloquium.
CHEMENG 699 should be taken all years each quarter of the academic year; all these units count toward the required 135 units.
The research units for CHEMENG 399 count toward the required 135 units, but may not be counted toward the 45 unit component.
All these seminar and research units are included within the required minimum of 135 units for degree.
Ph.D. students may petition to add a M.S. degree program to their university record; submit in a Graduate Authorization petition in Axess. Once the online petition is approved, the M.S. candidate must complete a Program Proposal for a Master's Degree form and submit it to departmental student services.
Ph.D. students with a M.S. program apply in Axess for M.S. degree conferral. The M.S. degree must be awarded within the University’s candidacy period for completion of a master’s degree.
Any course intended to satisfy the Ph.D. degree requirements must be taken for a letter grade, if offered. The overall grade point average of at least 3.0 must be maintained.
Degree milestones indicate progress toward degree.
To be advanced to Ph.D. candidacy, the student must secure a research dissertation adviser , maintain a 3.0 or higher GPA, successfully complete a Ph.D. candidacy examination, and submit a completed Application for Candidacy for Doctoral Degree form.
First, the research adviser and any required co-adviser must be established by the end of the second quarter in the Ph.D. program. Failure to do so leads to termination of a student's study toward a Ph.D. in Chemical Engineering; however, the student may continue to work toward an M.S. degree
Upon successful completion of this examination, candidates must submit an Application for Candidacy for Doctoral Degree form, approved by their research adviser, to departmental graduate student services within two months.
All Ph.D. candidates, regardless of the source of their financial support, are required to assist in the teaching of a minimum of two chemical engineering courses.
By the end of the second year, all Ph.D. candidates are required to assemble reading committees and submit Doctoral Dissertation Reading Committee forms signed by research advisers to student services.
All candidates in their third year are required to prepare and present a research poster during the annual Mason Lectures week in spring quarter.
A dissertation based on a successful investigation of a fundamental problem in chemical engineering is required.
The University’s general requirements for the Ph.D. minor are specified in the "Graduate Degrees" section of this bulletin.
All courses for the minor must be taken for a letter grade, and a GPA of at least 3.0 must be earned for these courses.
Finally, graduate students are active contributors to the advising relationship, proactively seeking academic and professional guidance and taking responsibility for informing themselves of policies and degree requirements for their graduate program.
The university doctoral students are active contributors to the advising relationship, proactively seeking academic and professional guidance and taking responsibility for informing themselves of policies and degree requirements for their graduate program.
In addition to core CHEMENG graduate courses in the 300 series and elective CHEMENG graduate courses in the 200 and 400 series, students pursuing advanced degrees in chemical engineering include elective courses offered by other departments.
Chemistry of natural and synthetic pigments in five historical palettes: earth , classical , medieval European , Renaissance , and synthetic
Please note that a Master's degree in chemistry or chemical engineering is not ordinarily offered, except under special circumstances, and with prior approval of the Graduate Study Committee.
Students coming from non-English speaking countries are required to take an English proficiency exam.
The Admissions Committees will take several components of the application into consideration including letters of recommendation, grades in college particularly those in chemistry, biochemistry, and related subjects, any research experience including resulting publications or presentations, GRE scores, and the statement of purpose.
Chemistry, Biochemistry & Molecular Biophysics, and Chemical Engineering options will not accept GRE exam scores as part of the admission process for the coming application cycle Caltech is reviewing the future use of the GRE at the institution.
Rice UniversityRanked 19 in Best National University.
Chemical and Biomolecular Engineering
Graduate Record Examination scores
TOEFL scores are required for any student requiring a visa or whose native language is not English. In lieu of the TOEFL the IELTS test will be accepted with a required score of 7 or greater. Note: Waiver of the English language proficiency requirement is applicable to a candidate with proof of degree from a university whose official language of instruction is English.
Scores on the Graduate Record Examination
Chemical and Biomolecular Engineering University of California, Berkeley
A bachelor’s degree or recognized equivalent from an accredited institution;
The Graduate Council views academic degrees not as vocational training certificates, but as evidence of broad training in research methods, independent study, and articulation of learning.
Programs may consider students for an additional academic master’s or professional master’s degree only if the additional degree is in a distinctly different field.
Applicants admitted to a doctoral program that requires a master’s degree to be earned at Berkeley as a prerequisite will be permitted to undertake the second master’s degree, despite the overlap in field.
Applicants may apply only to one single degree program or one concurrent degree program per admission cycle.
If the applicant is admitted, then official transcripts of all college-level work will be required. If applicant are admitted, an official transcript with evidence of degree conferral will not be required.
Students do not need a master's degree to apply for a doctoral degree.
In addition, students are required to take the CHM ENG 375 pedagogy course and two semesters in CHM ENG 300.
Upon entrance to the program, students will be required to declare an industry area specialization so that an appropriate academic schedule can be constructed.
Students have to complete a total of 24 semester units are required for the MS.
Time for completion of the degree is 2 semesters.
Credit Restrictions: Course does not satisfy unit or residence requirements for doctoral degree.
Tufts UniversityRanked 27 in Best National University.
Graduate students enrolled in the Chemical and Biological Engineering master’s programs have the option of a master of science degree with or without a thesis.
Develop their innovation, leadership and management skills and build their technical depth with the Dual Degree Master's Program. Applicant’ll earn two degrees: an M.S. offered by the Department of Civil and Environmental Engineering, and an M.S. Innovation & Management Applicant earn both degrees in an accelerated time frame and at a reduced cost.
Applicants to the graduate program are expected to have a degree at the level of Bachelor or Master in chemical engineering.
Applicants to the Ph.D. or M.S. in Chemical Engineering programs are generally expected to have earned a prior degree in Chemical Engineering.
TOEFL GRE Chemical Engineering
GRE scores are no longer required.
A score of 250 on the computer-based version , 100 on the iBT, or 7.0 on the IELTS is required for international students except those with a degree from a university that teaches exclusively in English.
Chemical and Biomolecular Engineering
All Ph.D-dgree students in the university department receive financial support.
The GRE test is not required.
A minimum score of 550 on the Paper-based Test of English as a Foreign Language , 213 on the computer based-TOEFL , or 79 on the Internet-based TOEFL is required in order to be considered for admission.
Davidson School of Chemical Engineering
Only the Verbal, Analytical, and Quantitative portions of the GRE are required for admission.
October is the best time to take the GRE. Since the graduate committee starts reviewing applications in early January, it is in their best interest to submit their GRE scores before that time.
Chemical and Life Sciences University of Maryland
During the course of studies towards a degree students may earn Credentials by taking a series of focused courses.
Suitable GRE scores will also be accepted to satisfy admission requirements
The GRE requirement has been waived for spring 2021 and fall 2021.
GRE test scores are required for all applicants.
Applicant will need to accurately report their general GRE scores in the Academic History section of this application. If applicant took the GRE more than five years ago, their scores have expired and applicant will need to retake the exam.
Recommendation/evaluation letters are not required to be received at the time of the application in order for applicant to be allowed to submit their application. Applicant can track the progress of their recommendation letter requests in EngCAS.
List the degree and program applicant are applying to
Chemical Biology Master Program
Credits from these classes can also apply toward a master’s degree.
Bachelor’s degree, with a minimum GPA of 3.0, from an accredited institution
A competitive GRE or GMAT score
GRE/GMAT is not required for part-time students.
Stevens Prepares applicant for a Great Career
Marcin Iwanicki studies the mechanisms of ovarian cancer initiation and progression with novel techniques such as CRISPR/CAS9 gene editing.
Chemical and Biomolecular Engineering
The Department also offers specialized graduate programs leading to the Master of Engineering degree in Particle Technology, a Graduate Certificate in Particle Technology, and a 4+1 Bachelor of Chemical Engineering/ME in Particle Technology degree.
A baccalaureate degree in the field or in a closely allied field of science or mathematics.
A minimum combined score of 311 on the Graduate Record Examination Aptitude Test is required of all applicants to the Chemical Engineering PhD program.
Graduates of other disciplines are also encouraged to apply; some remedial work may be required and is discussed on an individual basis.
The Master’s degree and the Certificate may be earned on a part-time basis.
Applicants must have a bachelor’s degree from an accredited four-year college or university.
Chemical Engineering Accelerated Master
Get on the fast track with the Chemical Engineering Accelerated Master’s program, and applicant will graduate with an advanced degree and start their career or PhD studies one year earlier than the average.
Students enrolled in the accelerated program begin graduate course work in their fourth year and finish the master’s degree requirements within two semesters of study beyond completion of their bachelor’s degree.
Students may apply for admission to the Chemical Engineering Accelerated Master’s program anytime after junior-level class standing is attained and before a bachelor’s degree is awarded.
The maximum time to degree for the Chemical Engineering Accelerated Master’s program is five years from the time the student is accepted into the program.
Both degrees must be earned in chemical engineering.
Students in the Chemical Engineering Accelerated Master’s program must complete the following required core courses
In addition to the core requirements, 15 credits of technical courses are required to earn the 30 credits needed for the accelerated master’s program.
Note: This is not an official list of degree requirements. Adjustments may be required due to curriculum changes.
Overall GPA of 3.0 or greater
Students must be accepted prior to receiving their Bachelor's degree.
Dave C. Swalm School of Chemical Engineering Mississippi State University
Admission criteria differ based on the graduate degree sought.
Cumulative GPA of 3.00 and GRE
A minimum of 90 hours toward the completion of the chemical engineering degree
All M.S. thesis students will be required to prepare and submit a manuscript for publication as first author.
Master of Science in Chemical Engineering
The master of science degree in chemical engineering requires the successful completion of 24 credit hours of course work, excluding a seminar, plus at least six hours in preparation of an acceptable thesis, or 27 credit hours of class work, excluding a seminar, plus three hours in preparation of a special project.
Students taking full advantage of the combined program ordinarily finish the master of science in engineering degree at the end of the fifth year of study.
Applicants for this program are not required to take the Graduate Record Examination or pay an application fee.