Tufts University: GRE scores may be waived for part-time students with five years of industry experience who are the students.S. citizens or permanent residents.
For admissions to masters degree program in Materials Engineering at Best Universities, GRE, GPA requirements are
Tufts UniversityRanked 27 in Best National University.
Materials Science and Engineering
College description: From drug delivery to semiconductors to nano-enabled membranes for water treatment, materials science and engineering at Tufts offers graduate students a wide array of opportunities to study and develop materials that will change the world.The master’s degree in Materials Science and Engineering is an interdisciplinary program, with students pursuing classes across multiple departments to achieve mastery in the field.Ph.D. in Civil and Environmental Engineering: Materials Science and Engineering.Five departments are associated with the joint materials science and engineering Ph.D. program: Biomedical Engineering, Chemical and Biological Engineering, Civil and Environmental Engineering, Electrical and Computer Engineering, and Mechanical Engineering. Students apply to and enroll in the joint materials science and engineering Ph.D. program through one of these departments either as a prospective graduate student or as a current graduate student after they have been accepted by one of the departmentsCurrent Tufts doctoral students in one of the affiliated departments can send the program director an informal petition to be admitted to the materials science and engineering Ph.D. program.The master’s degree in Materials Science and Engineering is an interdisciplinary program, with students pursuing classes across multiple departments to achieve mastery in the field.The Interaction of Light with Matter, Physics of Nanostructures and Interfaces, Semiconductor Photonics and Electronics, Epitaxial Crystal Growth, Special Interest in the Area of Materials and Devices for Energy and Infrared ApplicationsScientific computing and numerical analysis, fluid-structure interaction, and other applicationsSustainable Energy, Soft Electronics, Green TechnologiesMicromechanics of composites, interfacial fracture and adhesion, fatigue and creep damage in solder alloys, thermomechanical reliability of microelectronic packaging, defects and transport in solids with applications to solid oxide fuel cells and batteries, and ultrasonic nondestructive evaluation of advanced engineering materials- GRE scores may be waived for part-time students with five years of industry experience who are the students.S. citizens or permanent residents.
Stevens Institute of TechnologyRanked 76 in Best National University.
Materials Science and Engineering Master Program
College description: The materials science and engineering master’s program offers both Master of Engineering and Master of Science degrees designed to foster independent scholarly work while providing flexibility to accommodate their interests and career goals.Each of the materials science and engineering master’s programs immerses students in a dynamic and collaborative learning environment focused on innovative research.With a masters degree in materials science, applicant have the opportunity to spur technological advances that shape the modern world and to nearly any industry.Degree: Master of Science or Master of Engineering.Whether applicant’re looking to quickly build skills in their current industry or gain skills to transition to a new field, a graduate certificate can help applicant level up their career. Credits from these classes can also toward a master’s degree.Bachelor’s degree, with a minimum GPA of 3.0, from an accredited institution.The materials science master program develops in-demand knowledge and skills to put applicant on track for career success.Materials Science And Engineering Master's DegreeThe materials science and engineering master’s program offers both Master of Engineering and Master of Science degrees designed to foster independent scholarly work while providing flexibility to accommodate their interests and career goals.Each of the materials science and engineering master’s programs immerses students in a dynamic and collaborative learning environment focused on innovative research.With a masters degree in materials science, applicant have the opportunity to spur technological advances that shape the modern world and apply to nearly any industry.Degree: Master of Science or Master of EngineeringCredits from these classes can also apply toward a master’s degree.Bachelor’s degree, with a minimum GPA of 3.0, from an accredited institutionA competitive GRE or GMAT scoreGRE/GMAT is not required for part-time students.Stevens Prepares applicant for a Great CareerPriya Mukundhan - Director, Technology Development and ApplicationsStephanie Lee researches solution-processable materials for renewable energy applications, nanostructured materials, hybrid polymers, and crystal engineering…
GRE score required at Stevens Institute of Technology master's degree programs in Materials Engineering
Yale UniversityRanked 3 in Best National University.
Admissions Requirments Plant Molecular BiologyThe university encourage applications from international candidates as well as domestic candidates. The GRE Subject Test is not required but can be used as support in application materials.
Massachusetts Institute of TechnologyRanked 7 in Best National University.
Computational Science and EngineeringSpecial Note: Applicants interest in Computer Science must apply through the EECS application.TOEFL exam may be accepted in special cases.Most departments require the completion of an SM degree before admission to the PhD program is granted. As a result, applicants to those departments holding a bachelor's degree will be considered for admission to the SM program of the participating department with an ultimate degree objective of PhD in CSE.
Cornell UniversityRanked 15 in Best National University.
Admissions for M.Eng.Students
College description: A strong catalyst for materials research activities at Cornell has been provided by the Cornell Center for Materials Research , which provides substantial financial assistance to graduate students and maintains central research facilities.Research Interests: colloidal building blocks for three-dimensional photonic crystals, design and synthesis of colloids for environmental remediation strategies, mesoscale assembly techniques, colloid separations technology, hierarchical inorganic and hybrid bio-inspired materials, inorganic mesoporous materials.Free Memberships for Cornell Graduate Students and Postdocs.Pause and Unplug: Yoga for Graduate and Professional Students.Degree, usually completed within one year, is designed to put professional engineers on an accelerated career track, working either as applied engineers or as engineering managers.After February 1, in most fields, applications are reviewed for admission on a rolling basis.In most fields, applications are reviewed for admission on a rolling basis. For preferred deadlines, check with the field applicant are applying to.Deadlines vary Chemical Engineering, Geological SciencesTOEFL scores for applicants whose native language is not EnglishBiomedical Engineering: preferably letters of recommendationCivil and Environmental Engineering and Engineering Management: three letters of recommendation are requiredMechanical and Aerospace Engineering: three letters of recommendation are requiredOperations Research and Information Engineering: resume and list of prerequisites
Rice UniversityRanked 19 in Best National University.
Engineering Professional Master’s Programs
College description: The Professional Master’s Program in Materials Science and Nanoengineering, is also designed for professional who are ambitious on their technical fields, who want to take on new challenges and develop their leadership abilities.Students interested in the M.B.A M.M.S.N.E. degree must apply for dual admissions through the JGS and the Mechanical Engineering and Materials ScienceDecember 31February 15Complete the online application via Graduate and Postdoctoral StudiesThree personal letters of recommendation — references can submit letters onlineTOEFL / IELTS scoresApplicant may also wish to send an unofficial copy, for the application process.Rice University requires all applicants to provide GRE General Test scores.Official GRE scores must be received directly from the Educational Testing Service. Because the university match scores by an applicant’s name, it is important that applicant explicitly call the university attention to any discrepancies that might occur between their name as reported on their application forms, and as recorded on their GRE scores.The English as a Foreign Language test , is required for any student whose native language is not English. Applicants, who already hold a degree from a university where English is the official language, are exempt from providing a TOEFL score. Applicants must score at least 600 on the paper-based TOEFL, at least 250 on the computer-based TOEFL, or at least 90 on the internet-based test.For students who choose to take the IELTS in lieu of TOEFL, the minimum score is 7.Applications have to be received within the normal time for application for the program.Application fee waived
University of Virginia-Main CampusRanked 23 in Best National University.
College description: The MS and PhD degrees involve extensive research, leading to a thesis or dissertation, respectively. The MMSE degree does not include a thesis and is often achieved by off-grounds graduate students enrolled in the SEAS distance-learning program Virginia Engineering Online. The program of study for each of these degrees has been developed consistent with the principles of academic excellence as a foundation for cutting-edge research and cross-disciplinary learning. The starting point for each of the three degree programs is the MSE core curriculum.The MSE Graduate Student Coordinator will distribute this policy statement to all entering graduate students and will assist each student in understanding the departmental requirements.The program of study includes four electives beyond the MSE core. These electives are at the 5xxx, 6xxx and 7xxx levels, are approved by the graduate student advisor, and are selected from SEAS-course offerings or other UVa Science Mathematics courses. Up to six credits of 5xxx-level MSE courses, with a maximum of nine credits of 5xxx-level SEAS courses are permitted.Students who have earned graduate course credits at UVa or at another institution may transfer up to six credits into the MSE-MS program of study provided those courses were not used to earn another degree.Whatever their goals, UVA Engineering has a graduate degree that can help applicant get there.Accelerated Master's Degree Program for Systems EngineeringHigher-education degrees along with graduation date, GPA, and class rankRequest letters well in advance and remind recommenders as applicant approach the deadlineFrom each institution of higher learningRequired for all non-native English speakersThe UVA Engineering Online Professional Master's Degree program has an ongoing application process. If their application is not complete by the time applicant wish to start classes, applicant may register for a class while the application is being processed.Applications are reviewed and admissions decisions are made as the applications are received. Prospective students are encouraged to submit their applications early in the cycle.An applicant must have a baccalaureate degree from a recognized college or university. While this degree will normally be in the field of engineering or applied science, degrees in other fields may be acceptable.Each candidate must complete the Application for Admission.NOTE: not all programs require GRE scores for all degrees. Please check with their particular degree program for their requirements.If applicant are a Permanent Resident of the the students.S. or if applicant have a bachelor degree entirely at an institution where English is the primary language of instruction, applicant do NOT need to provide these scores.Official transcripts and test scores are NOT required for the review process but applicants should be sure to upload unofficial transcripts and indicate their unofficial test scores in their application. All materials including their resume, essays, unofficial transcripts, unofficial test scores and other supplemental materials should be submitted electronically as part of their application.If applicant wish to apply to a second program, please note applicant must pay an additional application fee for each submitted program and degree application.Applicants who believe they may qualify for an application fee waiver should first review the APPLICATION FEE WAIVER INFORMATION and then submit their request within their application.Applicant will need to complete and submit a separate application for each graduate program.Applications are reviewed basedon unofficial transcripts and self-reported test scores. Official test scores and transcripts are not necessary for the review process, but will be required if the applicant matriculates as a student.The application status is displayed when applicant log in to their online application.Admissions decisions are viewed by logging into their online application.To accept or decline an offer of admission, an applicant must enter the online application, access the decision letter and follow the link to the response page.UPD participates in a mutual aid agreement with other local departments and a cooperative patrol agreement with the City of Charlottesville.University Transit Service bus system that has an annual ridership greater than 3 million
Carnegie Mellon UniversityRanked 25 in Best National University.
Information Networking Institute
College description: Materials Science and Engineering Graduate Program Master of Science Programs Master of Science In Additive Manufacturing.Master of Science in Additive ManufacturingThe Master of Science in Additive Manufacturing is a two-semester full-time degree program designed to educate students in the engineering science required to understand and advance additive manufacturing and provide hands-on experience with designing, adapting and building parts using current AM technology.All students must achieve a B average in order to graduate.The formal course requirements of the Master of Science in Additive Manufacturing degree are similar to those of the existing MS programs: 36 units of additive manufacturing core, 24 units of additive breadth, 24 units of disciplinary concentration, and 12 units of breadth elective.Degree comprises 96 units breakdown by course type.Chemical Engineering, Civil Environmental Engineering, Materials Science Engineering, Mechanical Engineering, Engineering Public Policy, Electrical Computer Engineering.Graduate level engineering courses, and limited pre-approved non-engineering graduate classes.Priority for enrollment will be given to students who have declared the Additive Manufacturing Minor or are enrolled in Master of Science in Additive Manufacturing program.GPA of 3.0 or higherGRE General Test no more than five years oldTOEFL or IELTS, no more than two years old, is required for applicants whose native language/mother tongue is not EnglishApplications completed after December 31 will be considered on a space-available basis.All applications and recommendations must be submitted online.ETS reports must be submitted through ETS only.Applicants must answer “Yes” or “No” to the statement “If funding is available through their program, please indicate if applicant wish to be considered.” Academic records submitted to the INI before a formal request is made may be discarded. The purpose of the question is to determine which admitted applicants to consider for funding.Must be uploaded to the online applicationAll transcripts, mark sheets, and degree certificates that are written in foreign languages must be submitted in the original language and an English translation.Three Letters of RecommendationOfficial Graduate Record Examination General TestscoresThe GRE is required; neither the GMAT or GRE Subject Test are accepted for review. Applications will not be considered [if test scores are not reported in the online application. GRE scores will not be accepted if they are more than five years old.If applicant are an applicant whose native language/mother tongue is not English, the TOEFL is required.If applicant have taken the TOEFL or IELTS previously, applicant must submit a copy.Non-native English speakers who fail to take the ibTTOEFL or IELTS may not be reviewed for possible admission if these test results are missing from their completed application and a waiver of the tests hasn't been formally granted by the INI.It is recommended such requests be submitted no later than October to leave time to take the TOEFL or IELTS if the waiver request isn't approved.Essay and Area of Interest questionsFailure to provide a complete response to any essay or area of interest question will be considered a failure to complete the application; such applications will be considered incomplete and will not be reviewed for possible admission.Certificates obtained by the applicant should be listed in their resume. Research project should be addressed in the essay section of the application. Links to research projects may be provided in the essay.A non-refundable application fee of $75The application fee will be increased by $25 two weeks prior to the deadline; therefore, early submission of applications is encouraged.Applicants are encouraged to send transcripts, mark sheets by courier for tracking purposes and so receipt by the INI can be confirmed.Bachelor's degree in a technical discipline with a minimum cumulative QPA of 3.0 or equivalentStudents who wish to study at Silicon Valley during their time in the the students.S. are required to have a bachelor's degree in computer science, electrical and computer engineering, or a related field.The application to the single-degree program will be only be opened based on space availability following dual-degree admissions.Any questions about the UH application must be directed to that institution; the INI cannot provide guidance on their process.All application materials and recommendations must be submitted online.ETS reports--GRE General Test and TOEFL--may only be submitted through ETS. Applicants should enter their test date, registration number, self-reported scores in their online application.Unofficial transcripts should be uploaded to the online application.All transcripts, mark sheets and degree certificates written in foreign languages must be submitted in the original language and an English translation.Three letters of recommendationOfficial Graduate Record Examination General Test scoresThe GRE is required; neither the GMAT or GRE Subject Test is accepted for review. Applications will not be considered complete until the INI receives an official copy of test scores.Must be submitted online as hard copy statements will not be accepted.All technical and other certificates should be listed in their resume. Research projects should be addressed in the essay section in the online application.Applicants to the dual degree program must also submit a non-refundable application fee of ¥30,000 to the University of Hyogo.Applicants to the Dual-Degree and Single-Degree programs , may pay the INI application fee on-line when completing their submission.All these courses are mandatory for the B.S. in CS degree.Students eligible for admission to the Integrated MSIN and Integrated MSIS would not be required to take the GRE.All documents and information to be considered in the review process must be submitted by the given deadlines. The application form and supporting documents are all that is required to make a fair assessment of each applicant's qualifications.Please check the application review page for their status.
University of Michigan-Ann ArborRanked 29 in Best National University.
For Graduate Studies in Electrical Computer Engineering
College description: Students are enrolled in a 36-month Master degree program.The Ma Lab develops novel materials to support various biomedical applications, with emphasis on regenerative medicine, tissue engineering, and drug delivery.Graduate Student Instructor, Statistics, College of Literature, Science, and the Arts.Signal & Image Processing and Machine LearningThe EECS JI-SUGS program was designed for students receiving Electrical and Computer Engineering BS degrees from the UM-SJTU Joint InstituteHave a 3.6 GPA or betterThe application process is the same as the normal application process with some exceptions.For the academic statement of purpose, a document stating “JI-SUGS Program – Academic Statement of Purpose Not Required”For the personal statement, upload a document stating “JI-SUGS Program – Personal Statement Not Required”Applicant do not have to submit GRE scores.
New York UniversityRanked 32 in Best National University.
Science programsTo be eligible for consideration to any Tandon MS or Ph.D. program, applicant must hold a Bachelor's degree from an accredited institution, which includes a minimum of four years of full-time study. Bachelor of Engineering degrees may also be considered.The application for admission must be completed online and submitted electronically once applicant have answered all required questions. Applicant may access their online application with their username and password from any computer with internet access in order to change their answers as many times as applicant until applicant submit it.Once applicant have completed all sections of the application, validate and submit it. After submission, applicant will not be able to make changes to their application information. Make copies of all submitted documents for their personal file, as the New York University is unable to return applications and supporting documents.To ensure the most efficient application processing, submit their application before sending documents or submitting test scores.The Office of Graduate Admissions requires all applicants to complete the online application and does not accept paper-based applications. The application must be completed and electronically submitted on or before the posted deadline for the term of entry. After applicant submit the online application, applicant will not have access to edit or change the information applicant have supplied.The application fee is $75 and is payable in the online system by major credit card. If paying the application fee poses a financial hardship for applicant, the university don’t want that to stop applicant from applying.Please make sure to include their name , program, and date.Official transcripts are required and must be received before an application is reviewed.Academic Records and Proof of Degree from Indian InstitutionsOfficial university-issued or attested copies of college transcripts or a consolidated statement of marksIf sending attested copies of their mark sheets, the attestation must be made by the Controller of Examinations or Registrar from the degree-granting institution and received in a sealed envelope from the institution.If a degree has been earned at the time of application, an attested copy of the official Degree Certificate must be submitted. If the Degree Certificate is not yet available, an attested copy of the official Provisional Degree will be accepted for admission purposes only.For any transcript that is not officially issued in English by the institution, an English-language translation is required.Find out if their program requires the GRE or GMAT here: GRE/GMAT Requirements. Their official test scores must be on file before their application will be reviewed.GRE scores are valid for five years. The GRE must be taken again if their GRE scores are older than five years at the time of application submission.All Ph.D. programs require the GRE.The MS in Integrated Digital Media is the only exception and does not require GRE scores for full-time applicants.Applicants who are applying for part-time enrollment in the following programs must also submit official GRE scores for admission: Biomedical Engineering, Computer Engineering, Computer Science, Cybersecurity, Electrical Engineering, Financial Engineering, and Systems Engineering.GMAT scores may be substituted for the GRE only for applicants to the Management and Management of Technology programs. GMAT scores are valid for five years; the GMAT must be taken again if their GMAT scores are older than five years at the time of application submission. Applicant must send GMAT scores electronically by searching for the name of the institution.Proficiency will be determined by the Test of English as a Foreign Language , International English Language Testing System , Cambridge English: Advanced , or Pearson PTE Academic exams.Applicants whose first language is not English and/or who have not completed a bachelor’s degree in the United States.TOEFL, IELTS, and PTE scores are valid for two years. The test must be taken again if their score is older than two years at the time of application submission.If applicant have earned a bachelor or master's degree from a US institution, applicant will automatically be reviewed for a waiver and do not need to submit a waiver request form.Applicant are required to send two letters of recommendation. The university ask that applicant register their recommenders in the university online application system. Once registered, their recommenders will be prompted to submit their letters electronically.Do not submit financial documents with their application.Applicant can access the form by logging on to their application through this link.Please note that this waiver is for special cases only. If applicant have earned a bachelor or master's degree from a US institution, applicant will automatically be reviewed for a waiver, applicant do not need to submit a waiver request. Please keep in mind that applicant must first submit their application and official transcripts before a waiver request can be reviewed.The following are acceptable document types for uploads to the online application system: PDF, JPEG, JPG, GIF, TIFF, PNG, Bitmap, DOC, DOCX, RTF, and TXT.After applicant submit their online application, applicant will not have access to edit any of the information applicant have supplied.Eligible F-1 students with STEM degrees who finish their program of study and participate in an initial period of regular 12-month post-completion OPT have to option to apply for this extension for a total OPT period of 36 months.Once their application has been submitted and all required documents have been received, it will be reviewed by the department to which applicant applied.
Case Western Reserve UniversityRanked 38 in Best National University.
College description: Degree: Master of Science Major: Materials Science and Engineering.The university Accelerated master of science degree program lets applicant earn their degree in just one year through full-time study, allowing applicant to move ahead in their career faster.The university Professional master of science degree program allows applicant to continue working in industry full time while applicant work toward their degree part-time. In this program, applicant have the flexibility to align their final capstone project with their personal interests or even a professional project applicant are working on at their company, allowing applicant to bring their learning to life on the job even before applicant graduate.The university Research master of science degree program combines the coursework of the university Accelerated and Professional programs with a personalized research project and thesis—letting applicant delve deeper into an area of materials science that contributes in meaningful ways to the advancement of the field. Plus, unlike many other programs, the university admissions policies allow applicant to transition into the university PhD program at the completion of their MS if applicant choose to continue their research and academic endeavors.All of the university master’s degree options expose applicant to cutting-edge materials research, such as materials for energy conversion, lightweight alloys, additive manufacturing, surface engineering, failure analysis and materials data science.Explore degree requirements, courses and in the university general bulletin.Help advance the future of critical technologies through advanced materials while giving yourself a critical advantage in their career with a Master of Science in Materials Science and Engineering from Case Western Reserve University.Students may start these degrees during the fall or spring semester.Case Western Reserve University has an excellent track record of placing the university master’s students in desired positions in industry.Discover what makes a degree from a top university, delivered in this flexible manner, a sound investment in their education, their future and their life.Students who wish to be considered for graduate admission at Case Western Reserve University must hold a bachelor’s degree or its equivalent from a regionally accredited college or university.These programs can be completed in 16-20 months, depending on the chosen degree and the number of credits taken each semester.As such, a thesis is not required.Each candidate for the master’s degree must take an approved project course, or satisfactorily pass a comprehensive examination, to be administered by the department or curricular program committee.All online MS and ME degree programs consist of 10 courses.Courses offered in Case Western University’s online engineering programs are online or distance learning courses that do not require a student’s physical attendance for classes, exams or other purposes integral to completion of the courses. Please be aware that USCIS regulations give strict limits to the amount of online or distance coursework international students may pursue when in the United States.F-1 and J-1 visa students are not eligible to pursue online degrees while residing in the United States; therefore student on those visas are not eligible for the online engineering programs.The minimum acceptable internet-based TOEFL score is 90; the minimum acceptable paper-based TOEFL score is 577.The GRE is required for the Master of Science programs, but not required for the Master of Engineering program. Successful program students have strong quantitative skills, often evidenced by scores near the 80th percentile on the quantitative section of the GRE, which is generally consistent with a score of 160 or better.GRE scores are valid for five years from the test date; TOEFL and IELTS scores are valid for two years from the test date.
Lehigh UniversityRanked 40 in Best National University.
Graduate AdmissionA bachelor’s degree in a related field or a degree in technology at a recognized college, university or technical institution.An average GRE score of 75th percentile in the Quantitative area. The GRE exam is mandatory for most programs in the ISE Department. The Lehigh University does not require the GRE subject test.The TOEFL is required for all applicants whose native language is not English. If the applicant received a degree in the United States this test is waived. The TOEFL report is only valid for two years from the date the test was taken.The iBT minimum scores for Lehigh University P.C. Rossin College of Engineering are: Reading - 20; Listening - 15; Speaking - 20; Writing - 20.A GPA of at least 2.75 out of a 4.0 scale or earn a graduate GPA of at least 3.0 on a minimum of 12 hours of graduate work at other institutions.IF applicant are offered admission and accept the offer, only then is a final official transcript required to complete their file.Two letters of recommendation from qualified individuals to evaluate the applicant's academic achievement and potential for graduate studies.Application fee of $75, which is non-refundable and cannot be not waived.Two letters of Recommendation, available in an electronic version in the on line application.Official final transcripts are required only if offered admission and accepting the offer.GRE score - official scores reported by ETS to Lehigh University.TOEFL or IELTS scores , - official scores reported by ETS or British Council directly to Lehigh University.Degrees earned with GPA should be noted on resume.Essay: On a separate sheet, provide a summary of their career objectives and work experience with reference to the chosen field of graduate study.